BGM pro special tool for the end shield of the rear wheel bearing of all Vespa Wideframe models. Thanks to its clever construction, this tool can be used for both hole stitch sizes (Ø37 + 43mm). It offers the possibility of pre-tensioning the tool on the nut to be loosened. Due to the identical thread pitch of the tool and nut, the preload is fully retained during loosening, preventing slipping.
The main shaft of the GS 160 and SS 180 is held by such a castle nut. Wedi seat 40mm. bgm - Item number: BGM5440 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are interested in castle nut rear wheel bearing- BGM Original -VESPA Øi = 40mm, [...]
bgm - Item number: BGM4940 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are looking for castle nut rear wheel bearing- BGM original- VESPA Øi = 40mm, Øa = 49mm, teeth = 9- Vespa Super 125 (VNC1T), Super 150 (VNB1T -153261), for front wheel bearings Vespa GS160 (VSB1T, VSB2T), SS180 [...]
Castle nut for: Rear wheel bearings: Vespa 125 - VNA, VNB, GT125 (up to 78300), GTR125 (up to 124013) Vespa 150 - VBA, VBB, VGLA, VGLB, GL150, Sprint (up to No. 1170239), Sprint Veloce (up to No. 169300) Front wheel bearing: Vespa 160GS, 180SS Ø outside: 49mm Ø inside (shaft seal seat): 37mm slots: 9pcs. Height: 12,5mm Suitable tool - article no. 1800018 bgm - Item number: BGM4937 [...]
bgm - Item number: BGM7929TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Tools Other customers who are interested in castellated wrenches clutch nut -BGM ORIGINAL- Vespa Largeframe ( up to 1995), also searched for: Crown nut wrench | Coupling nut | Crown nut wrench | Clutch tool | Wrench | [...]
bgm - Item number: BGM809GST Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Engine> Clutch> Tools Other customers who are interested in clutch wrenches for lock nut / locknut -BGM ORIGINAL- Vespa GS150 / GS3, GS160, SS180, Ø = 33,5mm, Attention: You are interested in left-hand thread, you also looked for: Slotted nut | Tool | Coupling tool [...]
Very high quality special nut, made in Germany, for all Vespa engines with the clutch on the crankshaft built before 1990, which originally have a so-called castle nut. So therefore suitable for all vehicles built from 1950 onwards, such as V1-V5, VNB, VNA, GS150, GS160, Sprint, Rally, GT, GTR, T5, Cosa1, PX, PE etc ... These in Germany [...]
bgm - Item number: BGM79N07 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Frame> Fork> Nuts Other customers who are looking for headset cup lock nut h = 7mm -BGM ORIGINAL- Vespa T5, PKXL2, Cosa are also looking for: headset cup lock nut | Castle nut | Lock nut | Lock nut | Counter | Anti-rotation [...]
bgm - Item number: BGM79N06 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Fork> Nuts Other customers who are looking for a headset lock nut h = 6mm -BGM ORIGINAL- Vespa 125 VN1, VN2, VNA1T, VNA2T, VNB1T, VNB2T, VNB3T, VNB4T, VNB5T, VNB6T, Vespa 150 VL1, VL3T, VB1, VBA1T, VBB1T, [...]
bgm - Item number: BGM79N05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Fork> Nuts Other customers who are looking for headset cup lock nut h = 5mm -BGM ORIGINAL- Vespa PX, Sprint, Rally, GT, GTR, GL, TS, Super, SS180, GS160, V50, V90, PV125, ET3, PK, PKS, PKXL1, Vespa [...]
