Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]
Conversion wiring harness for retrofitting to: PK alternator or PK motor in 50N special with indicator (angular steering head) The conversion to a more modern alternator / ignition type is a tried and tested means to be on the road more permanently and safely. The non-contact CDI ignitions are almost indestructible and reliable, as is the light output with a modern, regulator-supported, on-board electrical system.
Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]
Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]
Conversion wiring harness for retrofitting to: PX alternator or PX engine in Rally, Sprint, VBB, Super, VNA, VNB, etc. PK alternator or PK engine in V50, Primavera, ET3, V90 etc. The conversion to a more modern alternator / Ignition type is a tried and tested means of traveling more permanently and safely. So the non-contact CDI ignitions are almost indestructible [...]
Conversion wiring harness for retrofitting to: Vespatronic ignition system in Rally, Sprint, VBB, Super, VNA, VNB, etc. The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more durable and safe on the road. The non-contact CDI ignitions are almost indestructible and reliable, and the light output with a modern, regulator-supported on-board electrical system is around
Small antique metal rear light that cuts a fine figure on many Vespas. Very high quality reproduction with a solid metal die-cast housing. Comes complete with a black rubber seal and both 6 V and 12 V lamps. bgm - Item number: BGM5033 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: [...]
Small antique metal rear light that cuts a fine figure on many Vespas. Very high quality reproduction with a solid metal die-cast housing. Comes complete with a black rubber seal and both 6 V and 12 V lamps. bgm - Item number: BGM5032 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: [...]
Conversion wiring harness for retrofitting to: PX alternator or PX engine in Rally, Sprint, VBB, Super, VNA, VNB, etc. PK alternator or PK engine in V50, Primavera, ET3, V90 etc. The conversion to a more modern alternator / Ignition type is a tried and tested means of traveling more permanently and safely. So the non-contact CDI ignitions are almost indestructible [...]
Blinker
3331026 Indicator set -BGM ORIGINAL LED - Vespa Zip 2, ZIP SP (2006-) - (ZAPC25, LBMC 25E) in front
Noble turn signals with LED technology. Beautify every Vespa ZIP 2 / ZIP SP from 2006 onwards in next to no time! Can be easily exchanged. Note: In some vehicles, the turn signals can no longer cycle as usual due to the low load caused by the LED technology. Load resistors (see accessories) can also be installed here. This simply between the two [...]
Blinker
3331025 Indicator set -BGM ORIGINAL LED - Vespa Zip 2, ZIP SP (2006-) - (ZAPC25, LBMC 25E) rear
Noble turn signals with LED technology. Beautify every Vespa ZIP 2 / ZIP SP from 2006 onwards in next to no time! Can be easily exchanged. Note: In some vehicles, the turn signals can no longer cycle as usual due to the low load caused by the LED technology. Load resistors (see accessories) can also be installed here. This simply between the two [...]
The LEDs for the rear lights and indicators slumber peacefully under the clear glass. Once switched on, you will no longer recognize your runner. The super bright diodes make for a worryingly aggressive look. Everything else can wrap up! Thanks to the E-marking, the rear light comes with the guarantee of undisturbed fun even on public roads. bgm - Item number: BGM5015LED Availability: [...]
