Throttle cable elbow
Throttle cable elbow set, as it is used as standard on our BGM carburettors. The throttle cable guide is not screwed tightly into the carburetor cover, but remains pivoted. The guide is attached with a clip on the underside. In this way, covers that have a thread (which may be defective) can be converted or reused without any problems. Including solid brass adjusting nut for [...]
Carburetor nozzles
CARBURETOR TUNING SET BGM FOR DELL'ORTO PHBH28 / PHBH30 Tuning set for the classic Dell'Orto PHBH series or its replicas (YSN) SCOPE OF DELIVERY Main nozzles: 130,135 Auxiliary nozzles: 58,60 Mixing tube: AS266 Needles: X3, X7, X13 The set offers a very good one Basic set-up for almost all tuned Vespa / Lambretta engines. MAIN JET The main jet oscillates around 130-135 in most engine setups [...]
Intake manifold -BGM PRO- Piaggio 2-stroke - CS = 28mm. Open intake manifold for the Piaggio 2 stroke engines. With it you can finally drive a really large carburetor (Areche 24 mm, Dellort 22-25 mm). With this you can really give your engine the spurs. The motto is more power thanks to more fuel. The design is both [...]
bgm - Item number: 2599092B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburettor> Choke levers Other customers who are interested in folding choke kit -BGM ORIGINAL- DellOrto PHVA , PHBN - Elektrochoke, also searched for: Klappchok | Folding choke | Kit | Flippchoke | Flipchoke | Flip [...]
The float level of the SI carburettors is not adjustable. If the float level is too low, it comes to full load jerks and a dangerous emaciation. This can be due to the use of a Cosa float chamber on a SI24 / 24E carburettor of the PX models. The swimmer of the Cosa lies lower and reduces the swimmer's level. The spacers offered here raise [...]
Intake manifold Piaggio 2 stroke Can also be used very well to drive the large carburettors (from 21mm) on the Piaggio 50 cc models. bgm - Item number: A203 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Carburettor> Intake manifold Other customers who [...]
Membrane blocks
Diaphragm plates are subject to natural wear, similar to piston rings and clutch shoes. The membrane plates should therefore be replaced at regular intervals. With the bgm ORIGINAL membrane blocks we offer you a cheap replacement in original equipment quality. Since everything is already pre-assembled, the change is quick and easy even for inexperienced screwdrivers. bgm - Item number: R100560020 Availability: on [...]
Diaphragm plates are subject to natural wear, similar to piston rings and clutch shoes. The membrane plates should therefore be replaced at regular intervals. With the bgm ORIGINAL membrane blocks we offer you a cheap replacement in original equipment quality. Since everything is already pre-assembled, the change is quick and easy even for inexperienced screwdrivers. bgm - item number: 457MF130 Availability: on [...]
Carburetor components
Knob choke lever for the bgm PWK, Keihin PWK and Stage 6 PWK carburettors bgm - item number: BGM8510 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Carburetor> Carburetor Components Other customers who are interested in choke -BGM ORIGINAL for PWK- pull button on the carburettor (bgm, Stage [...]
Air filter fleece BGM PRO for Motovespa Largeframe models 125-160cc High quality filter fleece from Marchald (Italy), manufactured for BGM PRO. Suitable for the direct intake engines (carburetor sits directly on the cylinder) of the largeframe Motovespa engines. 1: 1 replacement for the original wire mesh. Significantly better and finer filtering with a higher air flow rate at the same time. Therefore also ideal for engines that have already been upgraded. [...]
Very powerful SPORT intake manifold for Peugeot Ludix and Jet Force C-Tech. 17,5 mm PHVN and 19 mm PHBG carburettors with rubber connections fit on it. This combination already offers quite a decent potential to achieve a nice increase in performance. bgm - item number: A703 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 [...]
Carburetor components
bgm - Item number: 7671414 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Engine> Carburetor> Carburetor components Other customers who wanted float chamber -BGM ORIGINAL- PHBG - Interested in aluminum, also looked for: float chamber | Carburetor Chamber | Bowl | Carburetor float | Overflow | Expiry | Drowning [...]
