Ignition coils and CDI
Ignition coil -BGM PRO- Peugeot 50-100ccm, Honda 50ccm, Kymco 50ccm. bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage is [...]
Ignition coils and CDI
The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]
Ignition coils and CDI
BGM1650 ignition coil -BGM PRO- Minarelli 50 cc (Yamaha ignition)
Ignition coil -BGM PRO- Minarelli 50ccm (Yamaha ignition) bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage lies in the better [...]
IGNITION CABLE BGM PRO SILICONE 7MM The BGM Pro silicone ignition cable is a real professional product. The tinned copper wire with 1,5mm² enables a powerful spark under every condition. It is suitable for retrofitting on every motor and offers the following advantages compared to a standard PVC cable: High voltage resistant up to over 50000V (50kV) Heat resistant up to 200 ° (fire protection class FT-1 / VW-1) Copper core [...]
bgm - Item number: 7673820G Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in cable branch ignition base plate -VESPA- Vespa PX old ( 7 cables) - interested in gray cable, also searched for: cable branch | Ignition stator | Cable branch | Cable branch | [...]
Spacer plate for the HP4 ignition on Vespa PX, T5 and Cosa engines. If the tolerances of the engine housing, crankshaft, ignition base plate and fan wheel add up unfavorably, this can lead to a fluttering ignition timing. The reason for this is that the pick-ups in the fan wheel are not aligned with the pick-up. In order to compensate for this difference, we offer you this packing [...]
High quality new edition of the cable box for the classic Vespa PX models built up to 1984 and the Sprint Veloce models, both with battery. Not available from Piaggio for a long time, we had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. NOTE: Also available for PX models up to 1984 without [...]
Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]
Fahrzeugelektrik
3331567 Repair set plug for ignition stator cable -BGM ORIGINAL- Vespa PX Lusso, Cosa, T5 125ccm
Complete repair kit for the wiring harness of the vehicle and the ignition base plate. Set consists of: 1x round plug, plastic vehicle wiring harness, 4x cable lug plugs (socket) 1x round plug, plastic ignition base plate, 4x cable lugs (plug) Suitable for Vespa PX, Cosa, T5 bgm - item number: 3331567 Availability: in stock (Please check availability here in the Scooter Center Shop ) Weight: approx. 0,01 kg Category: [...]
Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]
High quality new edition of the cable boxes for the classic Vespa PX. Here in a special version for the PX models not launched in Germany until 1984 WITHOUT a battery. The wiring harness of these vehicles already has a round connector on the ignition side, like the later PX Lusso models. Therefore this box is higher than that of the German [...]
Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]
