Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]
The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]
The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]
The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]
Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]
bgm - Item number: BGM2581 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Engine> Carburetor> Intake manifold Other customers who are interested in intake manifold for BGM1550 -BGM PRO Ø24mm for Dellorto PHBL24 / 25, Polini CP23 / 24- Vespa Wideframe 125ccm Vespa V1 to V15, V30 to V33, VN, VM, [...]
Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]
Intake manifold -BGM PRO V2- Peugeot 50ccm (vertical cylinder) - CS = 23mm. Open BGM PRO intake manifold with which you can drive Arreche carburettors up to 21 mm, PHVA / PHBN carburettors up to 21 mm and the complete PHBG carburetor series. The intake manifold is supplied complete with a membrane block and two pads. The rubber flange connection can be exchanged separately. Powerful membrane suction kit for the right [...]
Open intake manifold for all Piaggio scooters with 2-stroke engine housing (50cc, 125cc, 180cc). The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher top speed! Due to the changed installation position of the carburetor, the original connection hose to the air filter box can no longer be used. With a Ø30mm connection width, [...]
Intake manifold -BGM PRO Evolution- Piaggio - CS = 23mm. Open intake manifold for all Piaggio scooters with the 50 cc engine housing. The ideal connection between the Dellorto, Gurtner and Arreche carburetors with 23 mm connection width. The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher [...]
The bgm PRO Twist intake manifold combines the possibility of installing a large carburetor with an intake cross-section of up to 30mm (inner diameter of the nozzle on the clamp 34mm) with the great advantage of completely free positioning. The rubber is rotatably mounted if the mounting plate has not yet been tightened. This means that the carburetor could also move forward in the direction of travel
Open intake manifold for all Piaggio 50-80 intake manifolds with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). Decent increase in performance, as the engine can finally breathe freely. The result is better acceleration values and freer turning and thus higher top speed. Very subtle, as the original airbox continues [...]
