BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

bgm - Item number: BGM5310BP2 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,56 kg Category: Motor> Brakes> Brake pads Other customers who are interested in brake shoes -BGM PRO Ø = 127 × 20 mm for brake drum BGM5310- Vespa 8 "rear, 2 mounts, Vespa VNB4T to VNB6T (h), VBB2T (h) - also used [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

BGM pro special tool for the end shield of the rear wheel bearing of all Vespa Wideframe models. Thanks to its clever construction, this tool can be used for both hole stitch sizes (Ø37 + 43mm). It offers the possibility of pre-tensioning the tool on the nut to be loosened. Due to the identical thread pitch of the tool and nut, the preload is fully retained during loosening, preventing slipping.

The bgm PRO membrane block comes with a powerful two-flap membrane. The GRP platelets are state of the art for optimum response behavior and high performance. In addition, the GRP plates have an extremely long service life, which means that maintenance is reduced to a minimum. The light metal block is vulcanized with rubber. This means that the platelets not only seal [...]

The bgm PRO Superstrong is the plug n play coupling solution for small frames - Made in Germany. Here in a special version for auxiliary shafts from the Italian manufacturer DRT Racing. Its auxiliary shafts move the clutch 1,5mm further towards the clutch cover. In order to avoid distancing, we offer a coupling that compensates for exactly this 1,5mm. [...]

Installation information: The coupling tiller and base plate can only be installed in one position. To do this, orient the spider to the base plate in such a way that both the lower and upper spring pouches of both components are aligned. This prevents the clutch springs from being misaligned, thereby ensuring that the clutch functions properly (see also PDF under "downloads"). As a lubricant, we recommend [...]

bgm PRO MRB cylinder head for pistons with 70-71 mm diameter. The head is CNC milled from solid material in Germany. The area of ​​the cooling fins is significantly increased compared to the Italian, Indian, Spanish and most other heads. This leads to significantly higher heat dissipation and better cooling. The head is warp-proof with extra [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

bgm - Item number: 3820053 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM ORIGINAL Pinasco 177 ccm- Vespa PX80, PX125, PX150 - 2.0mm are interested, also looked for: Spacer | Cylinder base | Distance seal | [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

bgm - Item number: BGM4511 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, long (165mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - chrome are interested, also looked for: brake levers | Brake handle [...]