The bgm PRO ignition base plates for the Lambretta were one of the first bgm products. The first samples were presented at the Eurolambretta 2007 in Neckarsulm. The base plate is based on the electronic ignition, which was introduced in 1970 with the Lambretta dl 200 electronic, later adapted by Piaggio for the Vespa and which is probably the most widespread [...]
The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]
The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]
bgm PRO fan wheel completely developed and manufactured in Germany. This is a one-piece fan wheel without rivets or screws. Technology of the 21st century with an almost original look and design. The fan wheel has been successfully tested up to 24.000 rpm and gives the highest alternator performance with the bgm V3 ignition base plate. Features: Moment of inertia 6240 kg mm² (-5%) [...]
bgm PRO fan wheel completely developed and manufactured in Germany. This is a one-piece fan wheel without rivets or screws. Technology of the 21st century with an almost original look and design. The fan wheel has been successfully tested up to 24.000 rpm and gives the highest alternator performance with the bgm V3 ignition base plate. Features: Moment of inertia 6240 kg mm² (-5%) [...]
The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]
bgm - Item number: BGM2109TU Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Tools> Tools Other customers who are interested in flywheel holder -BGM PRO Electronics- Lambretta LI, LIS, SX, TV, GP, DL - Motorbozen 21,5cm + 29cm are of interest, also searched for: pole wheel holder | Holder [...]
Tools
BGM2109T flywheel holder -BGM PRO electronics- Lambretta LI, LIS, SX, TV, GP, DL - motor bolt 29cm
bgm - Item number: BGM2109T Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Tools> Tools Other customers who are interested in flywheel holder -BGM PRO Electronics- Lambretta LI, LIS, SX, TV, GP, DL - motor bolts 29cm are of interest, also searched for: flywheel holder | Holder | Special tool [...]
The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]
