PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

BGM PRO silent rubbers made of polyurethane. Significantly tighter than the original rubbers, they reduce natural movement to a minimum. The damping works in a defined and precise manner. This makes the vehicle appear much tighter and the dampers respond more quickly. The set contains the two rubbers for the shock absorber on the front axle. The rubbers sit on the shock absorber and are each [...]

Lambretta cylinder head gasket with 1,0 mm thickness and 65,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0240 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

Perfect for building your own wiring harness. bgm - Item number: BGM4753 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in Bougie pipe -UNIVERSAL Ø = 4mm- 5m - black , also searched for: Bougierohr | Heat shrink tubing | Insulating tube | [...]

bgm - Item number: BGM2290B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Motor> Gearbox> Coupling arms Other customers who are interested in switching scales set incl. adjusting block -BGM Pro made by JPP, aluminum CNC- Lambretta LI, LIS, SX, TV (series 2-3), SX, DL, GP - black anodized [...]

bgm - Item number: BGM7891 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,68 kg Category: Frames> Brakes> Brake discs Other customers who wanted brake discs -BGM PRO Ø = 220x129x4,0mm 10o, bolt circle 138mm- is used for BGM PRO Anti-Dive disc brake kit are of interest, also looked for: Brake disc | Disc | Disc [...]

Clever tool from BGM for the damage-free installation of studs. Screw the BGM Pro tool onto the stud bolt and counter with the integrated hexagon socket screw. It is braced with the thread of the stud bolt. Now turn the outer wrench flat. The stud bolt is fixed and is loosened or screwed in. Pay attention to a sufficiently firm counter-locking so that [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: BGM66060P2 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop requirements> Electronics Other customers who are interested in connector set for cable harness -BGM PRO- Type series 060 AM SpecialSeal, 0.85-1.25mm², waterproof - 2 plug contacts are of interest, also looked for: Plug | Cable | Ignition stator | [...]

For permanent fixation, stickers need a clean, smooth and degreased surface. Our brake cleaner, for example, is very suitable for degreasing. In the case of larger areas to be glued, it is always an advantage to spray the area with a little water before gluing. The water can also be mixed with a few drops of detergent to make it [...]