All smallframe motors always have the same gear ratios (with the exception of three-speed and automatic). A longer gear ratio is only achieved ex works with so-called primary gears with different lengths. These translations are available in numerous translation levels. How long this translation should be depends on the available displacement and the engine's power delivery. In the large class (the [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

bgm - Item number: BGM6010S23 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 2,30mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: BGM01700N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Coupling> Nuts Other customers who are interested in M10 x1.00 (fine thread) SW = 16 half height -BGM PRO- (used as clutch nut Vespa for auxiliary shaft BGM PRO for V50, PV125, ET3, PK S, PK [...]

abc W 01 2,46 0,60 24,00 W 03 2,48 1,40 20,00 W 04 2,48 1,40 18,00 W 05 2,46 1,40 18,00 W 06 2,50 1,00 24,00 W 07 2,50 1,40 18,00 W 08 2,50 1,40 16,00 W 09 2,50 1,40 20,00 W 10 2,50 1,80 16,00 W 11 2,50 1,80 18,00 W 12 [...]

Tuning cylinder 150ccm BGM PRO suitable for Vespa VM, VN, VB1, VGL1, VL1 BGM PRO cylinder with 150ccm with 57 mm stroke suitable for all 2-channel engines. The cast iron cylinder has three transfer ports and is suitable for all wideframe motors with a 57 mm stroke. The cylinder with the 125 mm crankshaft fits on the 54 cc engines with 57 mm stroke.

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1203TL Availability: in stock (Please check the [...]

Lockable stainless steel tank cap for the Vespa PX Lusso and PK XL. High-quality processed and very practical - because lockable- tank cap for the Vespa. Offers ideal protection against the rarer 2-stroke mixture thieves and the common sugar lump throwers. bgm - item number: 5250040 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,21 [...]

Enables the motorcycle to be parked quickly and conveniently in the garage, carport, shed, etc. Also ideal for use on a lifting platform, while the two-wheeler is being transported on the loading area of ​​a transporter or trailer. Reliably fixes the vehicle on the front wheel in a vertical position. To do this, simply drive the front wheel into the seesaw, it folds with [...]

Noble BGM PRO aluminum cover for the engine cover of Vespa GT, GTV, GTS (until 2019), LX, S, ET4 Cover for the coupling nut of the Vario cover on the left side of the vehicle. This is centrally located in the field of vision and offers a nice opportunity to significantly upgrade the appearance of the scooter with little effort. MATERIAL & SURFACE High-strength aluminum (6061) which finally [...]