BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM0194S Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gearbox> Primary repair Other customers who are looking for springs for primary repair kit -BGM PRO reinforced- Vespa Wideframe VM, VN, VL, VB, VNA, VNB, VBA, VBB, VGLA, VGLB, VNC1T (-110000) are interested, also searched [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine, the BGM pole wheel an extremely quiet engine run. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output thanks to maximum number of windings Proven excitation coil [...]

bgm - Item number: BGM4590KTGB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Frame> Brakes> Frame parts Other customers who are looking for cover brake pump set -BGM PRO, without Mirror holes- Vespa GTL125 / 200 (ZAPM311, ZAPM312), GTS125 (ZAPM313), GTS250 (ZAPM451), GTS300 (ZAPM452), GTS ie Super125 (ZAPM453), GTS ie Super300 [...]

RECOMMENDATION We recommend a low-alloy gear oil of classes API GL3 / GL4, even for high-performance engines, in order to prevent the clutch from slipping even under extreme loads. This also applies to our BGM Superstrong / Superstrong CR couplings. The old engine oil specification SAE30 corresponds to today's transmission oil specification SAE 85W / 90. (US) bgm - Item number: BGM8290CRKT Availability: out of stock (Please check the [...]

BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

Tuning cylinder 150ccm BGM PRO suitable for Vespa VM, VN, VB1, VGL1, VL1 BGM PRO cylinder with 150ccm with 57 mm stroke suitable for all 2-channel engines. The cast iron cylinder has three transfer ports and is suitable for all wideframe motors with a 57 mm stroke. The cylinder with the 125 mm crankshaft fits on the 54 cc engines with 57 mm stroke.

Exhaust spring -ANTI RATTLE- stainless steel - 50mm: Stainless steel spring anti-vibration rubber Both heads can be rotated 360 ° Here you will find the luxury version of the exhaust springs, easy to hang in, rust-free and thanks to the rubber coating, completely rattle-free. bgm - Item number: BGM0901 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust [...]

The BGM Pro claw is made of high quality 15CrMo5 (SCM415) chrome molybdenum steel and is therefore very robust. The flanks are very tightly tolerated compared to the switching claws otherwise available on the market. This guides the claw exactly in the main shaft and effectively prevents setting / tipping. The profile for locking the gear steps has been greatly improved and [...]

Spare part at a great OEM level! bgm - Item number: R25927 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,28 kg Category: Motor> Gearbox> Pulleys Other customers who are interested in pulley -BGM ORIGINAL- Piaggio 50 ccm 2 -Takt (from 1998), also searched for: pulley | Fan wheel | V-belt pulley [...]

Ingenious little cable branch that enables the retrofitting of a brake light function on vehicles with disc brakes, even before the year of construction 1998. To do this, screw in a brake light switch on the brake pump (if not already present). The cable branch is suitably pre-assembled to be connected directly (incl. Rubber seal). Lead the cables through the steering head and the inside of the frame to the brake pedal and there in parallel to [...]