Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The material is spared. Used to mount the inner needle bearing (facing the wheel) of the front brake anchor plate of the Vespa PX, T5, Cosa and PK models. [...]

BGM PRO CDI for IDM retrofit ignitions -original optics in connection with an optimized ignition curve for touring engines- THE PROBLEM OF ORIGINAL IDM CDI ON TOURING ENGINES All IDM-based ignitions (Vespatronic, Malossi VesPower, Polini IDM, Varitronic, Pinasco Flytech, Parmakit etc.) use the same CDI. Their ignition curve is designed for high-performance engines with late performance and high speeds. [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

Cylinder base gasket -BGM PRO- 1,5mm Polini 207ccm bgm - Item number: 3820034 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Other customers who for spacer cylinder base -BGM ORIGINAL Polini 207 ccm - 210 ccm - 221 ccm - Vespa PX200, Rally200 [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

CARBURETOR TUNING SET BGM FOR DELL'ORTO PHBH28 / PHBH30 Tuning set for the classic Dell'Orto PHBH series or its replicas (YSN) SCOPE OF DELIVERY Main nozzles: 130,135 Auxiliary nozzles: 58,60 Mixing tube: AS266 Needles: X3, X7, X13 The set offers a very good one Basic set-up for almost all tuned Vespa / Lambretta engines. MAIN JET The main jet oscillates around 130-135 in most engine setups [...]

bgm - Item number: BGM857KTL2 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburetor> Carburetor nozzles Other customers who are interested in air nozzle set -BGM PRO- Dellorto ( Type: 5827) SI 120-140-150-160-170-180-190, also looked for: Air nozzle | Hlkd | Main air correction nozzle | Correction nozzle | Carburetor nozzle | Si [...]

bgm - Item number: BGM0292HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 1.0mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

bgm - Item number: BGM5342 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Brakes> Brake pads Other customers who are interested in brake shoes -BGM PRO Ø = 135x16mm- Piaggio Boss, Piaggio Boxer, Piaggio Bravo, Piaggio CBA, Piaggio Ciao, Piaggio Eco, Piaggio Grillo, Piaggio Si, Piaggio Superbravo, Piaggio [...]

bgm - Item number: BGM6606HL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frames> Electronics> Headlights Other customers who are looking for cable adapter kit headlight conversion H4 to original PIAGGIO LED headlights -BGM PRO- Vespa Primavera 50-125-150, Sprint 50-125-150, GTS125-300 (model years 2014-2018) are interested, also looked for: indicators [...]

Replacement cylinder head for the BGM Pro 177ccm cylinder kit. CNC milled from solid aluminum. The combustion chamber is designed in such a way that it is immersed in the cylinder and thus ensures the best possible seal. It also makes it possible to vary the control angles of the cylinder without having to machine the cylinder head. The combustion chamber is designed so that the very narrow [...]

With the Sport and Competition line, BGM Pro has two high-quality shock absorber series in its delivery program. Both have in common the perfect workmanship, the high material quality and approval by means of ABE. Despite their high resilience, the dampers are very light, as they are made of high-strength CNC aluminum and have excellent surface protection made of hard anodized aluminum. The front [...]