Steering tube BGM PRO Vespa PK XL2 - modified for use on Vespa Largeframe (around 1961-1979) e.g. Super 125/150, Sprint150, Rally180 / 200, GT / GTR125, TS125 Motovespa DS200, Sprint / GS150 (04C), GT160 (09C ) PROBLEMS OF THE OLD ORIGINAL FORKS The forks of the old Vespa largeframe models have antiquated damping and suspension kinematics. Due to the design, the chassis hits quickly when braking hard ('goes [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

Perfectly suited to block the drive via the clutch basket and to be able to loosen the clutch nut, screw of the front sprocket and even the fan wheel nut. bgm - Item number: 8099003 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Motor> Clutch> Tools Other customers who are interested in [...]

BGM PRO silicone sealing sets consist of a 0,5mm thick, high-quality sealing paper (like Piaggio "green" original). In addition, the seals, which are always in contact with oil, have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set is available on all Lambretta series 1-3 models as well as [...]

bgm - Item number: 4350002 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frames> Cables> Cables Other customers who want universal train inside -Ø = 1,2mm x 2500mm, nipple Ø = 3,0mm x 3mm- used as throttle cable - turned interested, also looked for: Zug | Universal | [...]

bgm PRO fan wheel completely developed and manufactured in Germany. This is a one-piece fan wheel without rivets or screws. Technology of the 21st century with an almost original look and design. The fan wheel has been successfully tested up to 24.000 rpm and gives the highest alternator performance with the bgm V3 ignition base plate. Features: Moment of inertia 6240 kg mm² (-5%) [...]

The bgm PRO air filter is the perfect replacement for all Series 3 paper filters from the original air filter box. Thanks to the fine-meshed stainless steel net, the bgm filter not only offers excellent filter performance, but also a significantly improved air throughput than the standard part. The filter performance can even be increased when using filter oil. For normal road use [...]

High quality new edition of the cable box for the classic Vespa PX models up to 1984. Installed under the horn cascade. Not available from Piaggio for a long time, we have had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. bgm - Item number: 1163603 Availability: in stock (Please check the availability here in the Scooter [...]

Replacement inner raw material for the Vespa Smallframe bananas. bgm - Item number: BGM1125BP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Exhaust> Exhaust systems Other customers who are interested in exhaust inner pipe -BGM PRO Banana SPORT / TOURING- Vespa V50, V90, SS50, SS90, PV125, ET3 are also looking for: Inner exhaust pipe [...]

bgm - Item number: BGM2105U4DP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust manifold -BGM PRO Clubman V4.0- Lambretta series 1-3 - unpainted interested, also looked for: exhaust manifold | Elbow | Exhaust flange | Exhaust manifold | [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]