bgm - Item number: BGM2225HS07 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 0,7 - XNUMXmm are interested, also looked for: Spacer | [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine, the BGM pole wheel an extremely quiet engine run. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output thanks to maximum number of windings Proven excitation coil [...]

The auxiliary shaft bearings of the Vespa GS160 (GS4) / SS180 models differ significantly from those of the other large-volume Vespa engines, such as the Rally180. The GS160 / SS180 was designed to be much more robust and complex with a large needle bearing cage attached to the outside of the kick starter pinion running surface. This significantly reduces the speed of rotation and the storage area is significantly larger than with [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

bgm - Item number: BGM0223S15 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL- Vespa V50 , PV125, ET3, PK50, PK80, PK125 - 1.5mm, also searched for: Spacer | Cylinder base | Distance seal [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM2225BS03 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta SX 200, TV 200, DL / GP 200 - 0,3mm are also looking for: Spacer | Cylinder base | Distance seal [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

If the mirror holes in the handlebar trim of the GTS models from 2016 are to be closed, this is difficult to implement due to the uneven trim in this area. The specially manufactured cover caps from BGM PRO are an optical and technically first-class solution. These are made of the same material as the handlebar cover and exactly follow the design.

Compact voltage regulator for all alternators with 12 volts. The controller supplies alternating current and optionally also direct current. Thus, it is not only the perfect and reliable replacement for all conventional voltage regulators, it also enables a modern expansion of the existing on-board network. AC - AC alternating current: Input and output for the unregulated alternating current of the ignition base plate and the regulated current [...]

bgm - Item number: BGM7891 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,68 kg Category: Frames> Brakes> Brake discs Other customers who wanted brake discs -BGM PRO Ø = 220x129x4,0mm 10o, bolt circle 138mm- is used for BGM PRO Anti-Dive disc brake kit are of interest, also looked for: Brake disc | Disc | Disc [...]