Now finally for the front too! Turn signals in the trendy clear glass style with LEDs for your Gilera Runner. Of course with E-marking and therefore completely legal. Nevertheless, they not only ensure a tidy and clean front section, but also give the very special street fighter look. The turn signals come particularly well with our clear glass rear light. For problem-free operation [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

bgm - Item number: 3710019 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (12x15x15mm) - Peugeot 50 cc (vertical cylinder), Derbi Senda, Minarelli AM6 are interested, also searched for: connecting rod bearings | Needle roller bearings | Piston pin bearings | [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set can be used on almost all Vespa largeframe models: Vespa [...]

bgm - Item number: BGM2775 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 75mm -BGM ORIGINAL- Vespa Smallframe V50, PV125, ET3, PK are also looking for: Engine housing bolts | Motor housing studs | Set | [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

bgm - Item number: BGM857KTL2 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburetor> Carburetor nozzles Other customers who are interested in air nozzle set -BGM PRO- Dellorto ( Type: 5827) SI 120-140-150-160-170-180-190, also looked for: Air nozzle | Hlkd | Main air correction nozzle | Correction nozzle | Carburetor nozzle | Si [...]

BRAKE CALIPER MOUNT 'TOURING RADIAL' BGM PRO FOR LML Star / Stella Professional brake caliper mount from BGM PRO 'Made in Italy'. Enables the assembly of the radially attached BGM PRO 4-piston brake caliper. With fine controllability, this enables braking values ​​at motorcycle level. MAXIMUM DECELERATION A special feature of the BGM PRO brake calliper adapter is its uncompromising design for the greatest possible deceleration. The brake caliper was [...]

Cylinder head gasket -BGM PRO- 2.0mm Polini 177ccm, DR 177ccm bgm - item number: 3820054 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]