When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

bgm - Item number: BGM3425 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Fork> Nuts Other customers who are interested in castle nut swing arm / front wheel bearing- BGM Original -VESPA - V50, V90, SS50, SS90, PV125, ET3 are also interested in: Circlip | Front wheel bearings | Circlip | Clip | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Latest version of the Lambretta bgm shock absorber. Compared to its predecessor, many details have been further optimized. The biggest innovation is the ability to adjust the height of the shock absorber by 10 mm. This allows additional space to be created between the frame and the suction cup. New features: bushings with silent rubbers mounted progressively wound spring rebound and compression damping with hard marking [...]

bgm - Item number: BGM8040N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition -BGM PRO base plate HP V4.5 Interested in silicone DC Lambretta electronic ignition, also looked for: ignition | Alternator | Lima | Alternator | [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with HengTong type brake pump. Suitable for Vespa PX built in 2004-today. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal for braking with only two [...]

bgm - Item number: BGM2225HS12 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 1,2 - XNUMXmm are interested, also looked for: Spacer | [...]

bgm - Item number: BGM2112 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Motor> Gearbox> Variomatic weights Other customers who are interested in weights -BGM ORIGINAL 21x17mm- 11,5g interested, also searched for: weights | Role | Vario roll | Variator roller | Vario rolls | Rolls | Variator | [...]

Manufactured exactly according to our specifications, we have managed to use a very high quality organic pad mixture that is pressure and temperature stable on the one hand, but is still low in wear. The whole thing combined with a very good grip to always have the full torque on the rear wheel. Even with a very high spring force used, the separation path is [...]

Repair kit BGM PRO for the primary reduction of BGM PRO with straight-toothed primary gear (62/63 teeth) for Vespa Wideframe engines, e.g. Vespa VM, VN, VL, VB, VNA, VNB, VBA. The springs contained in the large primary gear serve as shock absorbers. They protect the gear unit from high load peaks. If they are too soft in relation to the engine torque, they are completely [...]

Set screw BGM PRO Vespa Largeframe for fastening carburetor SI20 / SI24 / SI26 New type of screw from BGM PRO with practical hexagon head Replaces the conventional hexagon socket screw for fastening the carburetor of Vespa PX models from 1984 (PX Lusso, My, 2011, Cosa) Also fits for fastening a Malossi / Polini / Pinasco rotary valve intake manifold Can also be used as a replacement for the stud bolts / nuts for fastening the carburetor of the earlier Vespa Largeframe [...]

Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]