bgm - Item number: BGM1770HS08 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacers Other customers who are looking for Spacer cylinder head -BGM PRO 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 0.8mm interested, searched [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

BGM Pro SC SPORT shock absorbers -Sporty- Comfortable -Adjustable-With TÜV- Sportiness paired with outstanding optics. With factory pre-configured damping, spring preload (pre-load) continuously adjustable. HARMONIOUS The BGM Pro SC SPORT coilover kit convinces with its harmonious basic set-up. Intended for sporty driving on the road, the predefined specific damper setting and spring rate is an optimal balance of sportiness and suitability for everyday use. [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI26 / 26 E Dell'Orto / Spaco carburetor. With a diameter of 25mm, these already have significantly more area than a SI24 carburettor. In principle, this type of carburetor can be drilled out further, but then the guidance of the throttle valve and its sealing function are no longer 100% guaranteed. Therefore we restrict [...]

bgm - Item number: BGM857KTL2 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburetor> Carburetor nozzles Other customers who are interested in air nozzle set -BGM PRO- Dellorto ( Type: 5827) SI 120-140-150-160-170-180-190, also looked for: Air nozzle | Hlkd | Main air correction nozzle | Correction nozzle | Carburetor nozzle | Si [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

We can offer a spring with a 16% higher spring rate to match our TÜV-tested BGM Pro SC / F15 shock absorbers. Ideal for vehicles with a lot of payload or in racing. Without test mark, therefore only for the racetrack. bgm - Item number: BGM7783SPH15 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

bgm - Item number: R14403 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,08 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM ORIGINAL- CPI Oliver, Hussar , Popcorn, Formula, Bingo, GENERIC XOR, Cracker, Toxic, Pandora, Sirion, XOR2, KEEWAY Ry8, Fact50 (Focus), ATU (Explorer) Spin, [...]

Gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality production (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring ready for direct installation TRANSMISSION OIL CONTROL Place the vehicle on a level surface. Unscrew the oil dipstick [...]

bgm - Item number: BGM4570 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Frame> Brakes> Brake-clutch levers Other customers who are interested in clutch levers -BGM PRO CNC cable - Vespa Largeframe 1957-1998 - PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180, Smallframe [...]

bgm - Item number: BGM9999 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Gift items> Leisure Other customers who are interested in key rings -BGM PRO SUPERCHARGED- Black were looking for also after: key ring | Lanyard | Key ring | Keylace | Lanyard | Keychain | Key | Present [...]