BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

bgm - Item number: 7900055 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM PRO- Mikuni TM 24, TMX 32, TMX 35, TMX 38 were also looking for: mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller [...]

bgm - Item number: 7676252 Availability: In stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Motor housing> Retaining plate Other customers who are interested in retaining plate ignition coil / CDI -BGM ORIGINAL- Vespa PX 80 (V8X1T), PX 125 (VNX1T, VNX2T), PX 150 (VLX1T), PX 200 (VSX1T), Rally 200 (VSE1T [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

bgm - Item number: 7676252KT Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,21 kg Category: Motor> Motor housing> Retaining plates Other customers who are interested in retaining plate set ignition coil / CDI -BGM ORIGINAL - Vespa PX 80 (V8X1T), PX 125 (VNX1T, VNX2T), PX 150 (VLX1T), PX 200 (VSX1T), Rally 200 (VSE1T [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

bgm - Item number: BGM3425 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Fork> Nuts Other customers who are interested in castle nut swing arm / front wheel bearing- BGM Original -VESPA - V50, V90, SS50, SS90, PV125, ET3 are also interested in: Circlip | Front wheel bearings | Circlip | Clip | [...]

The power and torque values ​​of so-called smallframe motors that are now possible have increased significantly in recent years and seem to be growing steadily. Power and torque values ​​of well over 35PS / 30Nm can be found more and more frequently. As a result, other components are of course also stressed significantly more. An important and highly stressed link between the crankshaft and the gearbox is [...]

The pistons of the BGM177 cylinder are manufactured by the renowned Italian piston manufacturer METEOR. The piston has a high silicon content. As a result, it has less thermal expansion, is more wear-resistant and thermally very stable. PISTON RINGS Two 1mm thick piston rings, also made in Italy, minimize friction and thus increase performance and speed stability. Otherwise they are identical [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]