bgm - Item number: SC4013 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Rubber parts> Seals Other customers who are interested in sealing set fuel tap -BGM ORIGINAL- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass fuel tap | [...]

bgm - Item number: BGM7795 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,52 kg Category: Frame> Body> Steering damper Other customers who are interested in steering damper -BGM PRO SC FS / 10- 380mm- 125mm damper travel - gun metal are interested, also searched for: Steering damper | Steering damper | Shock absorber | Shattering | [...]

Stud BGM Original for the gear lever / crankcase of the Vespa 80-200ccm largeframe engines. Made of high tensile strength steel with a rolled (rolled) thread. In contrast to a cut thread, the surface is firmer and the thread flanks are press polished. This results in a highly resilient and permanently durable thread. Tightening torque M7: 13-18Nm Scope of delivery: 6x stud bolts M7x50mm bgm - Article number: BGM2750S Availability: [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

The main shaft of the GS 160 and SS 180 is held by such a castle nut. Wedi seat 40mm. bgm - Item number: BGM5440 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are interested in castle nut rear wheel bearing- BGM Original -VESPA Øi = 40mm, [...]

The BGM Pro Conversion light switch is the perfect addition to: 7673183 Ignition set -BGM Pro electronic- Vespa V50 - V90, PV, ET3, PK S 9077011 Wiring harness set Conversion -BGM PRO, Vespa AC conversion to electronic ignition 7672167 Headlight -OEM QUALITY, rectangular Vespa V50 Special - Bilux It is required if the vehicle has an electronic ignition with [...]

Clutch linings BGM PRO TOURING Alu type COSA2 Perfect symbiosis of racing technology and reliability for touring riders Suitable for all conventional Cosa2 clutch baskets (strap width as original, 14mm) Aluminum carrier material with reinforced contact surface on the straps Sintered lining material such as Honda CR80 in a wide design The BGM PRO Touring Alu pads combine the advantages of the popular CR80 racing pads with [...]

The proven BGM Superstrong clutch is now also available for the Vespa GS150 / GS160 and SS180 models. The coupling is delivered ready for installation. It replaces the serial coupling of the GS / SS models 1: 1 and can usually * be used without further modifications. The clutch is available with 22 teeth (like the original) or with 23 teeth (longer reduction). Helical teeth [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]