Open intake manifold for Minarellis with horizontal cylinder Intake manifold with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). The result is better acceleration values ​​and freer turning and thus higher top speed. Very subtle, since the original airbox [...]

bgm - Item number: 7674551 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Clutch> Spacer Other customers who are interested in Spacer clutch cover -BGM PRO- V50, PV125 , ET3, PK50, PK80, PK125 - 1.5mm, also searched for: Spacer | Clutch cover | Spacer | Distance seal [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus neither the crankshaft nor new bearings are stressed for pure measurement purposes. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1207TL Availability: out of stock (Please check [...]

Nice PX Kickstarter in high quality and clean finish. Chrome. bgm - Item number: 5050019C Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,32 kg Category: Motor> Gearbox> Kickstarter Other customers who are interested in Kickstarter-BGM ORIGINAL- Vespa PX, Cosa - Are interested in chrome, also looked for: Kickstarter | [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with a connection size of Ø = 35 / 40mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. This conversion link allows [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

bgm - Item number: BGM6475G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,40 kg Category: Workshop requirements> Trains Other customers who are interested in outer cover -BGM ORIGINAL, PE inner cover- Ø outside = 5mm (l = 25 meters) - interest in gray, also looked for: outer shell | Train | Coat | Outer cable | [...]

bgm - Item number: 7673822 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Engine> Ignition> Cables Other customers who are interested in ignition cables -UNIVERSAL Ø = 7mm- 100cm - Schwarz are also interested in: Ignition cables | Ignition cable | Spark plug wire | Cable | Ignition | Cable | Cable [...]

Very nice and heavy quality. Replaces countless special tools that only fit on one model at a time. bgm - Item number: BGM8800 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,71 kg Category: Motor> Clutch> Tools Other customers who are interested in clutch holder / flywheel holder -BGM ORIGINAL Ø = 90 -125mm- all automatic scooters are interested, looked [...]

As a small series exclusively handcrafted for us in Italy. As a special feature, the cover on the side and top of the middle part is covered with Alfatex, reminiscent of Italian sports cars from the 60s / 70s. The high-quality foam padding guarantees a high level of comfort even on long journeys. A premium product that shows its good properties at first [...]

Latest version of the Lambretta bgm shock absorber. Compared to its predecessor, many details have been further optimized. The biggest innovation is the ability to adjust the height of the shock absorber by 10 mm. This allows additional space to be created between the frame and the suction cup. New features: bushings with silent rubbers mounted progressively wound spring rebound and compression damping with hard marking [...]