Carburetor -PHBN 17,5- Minarelli 50ccm. The PHBN carburetors are a constant in the scooter sector. They are characterized by easy assembly and good tunability. If a DellOrto PHBN carburetor is already installed on the vehicle, it can be changed to a larger one of the same type without any problems. The PHBN 17,5 mm helps all 70s [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM8010GLI Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Clutch> Clutch pressure plates Other customers who are interested in disc for clutch pressure plate -BGM PRO Superstrong 10 Springs - Lambretta - Type LI are also interested in: Pressure plate | Clutch | Plate | [...]

bgm - Item number: BGM0900EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 50mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

bgm - Item number: 3333226KT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame> Shock absorbers> Screws Other customers who are interested in screw set rear shock absorber -BGM ORIGINAL- M9 x 70mm extra long, SW14, galvanized- used for YSS / BGM PRO SC shock absorber / motor - Vespa V50, PV, ET3, [...]

The BGM PRO SC shock absorber series is one of the finest chassis components that you can treat your scooter to. CNC machined, high-strength aluminum (6061) which is finally equipped with an absolutely corrosion-resistant hard anodized coating, form the basis for the high-end chassis. The very stable piston rods are machined in an extremely complex manner in order to obtain perfect surfaces with ideal sliding properties. Thereby [...]

Black RACING variant! The Dellorto carburettors are not only a fixture in the scooter sector. Many scooters come with Dellorto carburettors ex works. The Dellortos are characterized by good tunability and easy assembly. Especially if a Dellorto carburettor was already installed, the change to a larger one is necessary [...]

The auxiliary nozzle of the SI carburetor does not have the simple function of a conventional nozzle, ie the pure regulation of the amount of fuel. With the introduction of the PX in 1977, the previously used SI carburettor type and its auxiliary nozzles were modified. The old carburetor types, such as those still used in the rally engines, had a separate air duct for the auxiliary nozzles. [...]

Ignition coil -BGM PRO- Peugeot 50-100ccm, Honda 50ccm, Kymco 50ccm. bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage is [...]

Headset assembly key –BGM PRO- Made in Germany Assemble the headset quickly and easily like a professional. This is possible with the quality tool from BGM PRO. Manufactured according to our specifications by a German company, it exceeds all tools on the market for this purpose. As soon as you hold it in your hand, you notice the high value. Real, [...]

Noble BGM PRO aluminum cover for the engine cover of Vespa GT, GTV, GTS (until 2019), LX, S, ET4 Cover for the coupling nut of the Vario cover on the left side of the vehicle. This is centrally located in the field of vision and offers a nice opportunity to significantly upgrade the appearance of the scooter with little effort. MATERIAL & SURFACE High-strength aluminum (6061) which finally [...]