bgm - Item number: BGM6606BL18 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Electronics> Turn signals Other customers who are looking for cable adapter kit, rear turn signal conversion -BGM PRO- Vespa GTS125-300 (model years -2018) - interested in using Moto Nostra LED indicators with dynamic LED running lights, searched [...]

Practical quick coupling that is mounted in the fuel hose. If, for example, the tank or the carburettor is to be removed, the hose at the coupling is disconnected. The internal valves prevent fuel leakage on either side of the clutch. They can be separated quickly at the push of a button with just one movement and can be easily closed again by sticking them together. [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Rear brake drum "Made in Germany" by Strohspeed for BGM PRO. Suitable for all Vespa models with 8 inch tires (not Vespa Super VNC / VBC). Made of high-quality cast iron, it offers enormous advantages over conventional brake drums made of thin sheet steel: suitable for original and tubeless rims no distortion due to hot brakes perfect concentricity due to exact centering over [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

High-quality wheel axle that is absolutely dimensionally stable * compared to many other axles offered on the market. With the axle offered here, the wheel is perfectly guided again. The bearing surfaces are hardened as in the original, thus guaranteeing a long service life. SINGLE-SIDED LOADING The one-sided suspended front wheel of the Vespa causes an asymmetrical distribution of forces on the front wheel bearings [...]

bgm - Item number: BGM4507 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, short (130mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - black matt are interested, also looked for: brake levers | [...]

The BGM PRO SC shock absorber series is one of the finest chassis components that you can treat your scooter to. CNC machined, high-strength aluminum (6061) which is finally equipped with an absolutely corrosion-resistant hard anodized coating, form the basis for the high-end chassis. The very stable piston rods are machined in an extremely complex manner in order to obtain perfect surfaces with ideal sliding properties. Thereby [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 28.5 / 28.5mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]

bgm - Item number: BGM1220MAPV Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Seals> Seals Other customers who are interested in seals crankcase / fan wheel housing (5x) -BGM PRO silicone Lambretta LI. LIS, SX, TV (Series 2-3), DL / GP 125-200 are also interested in: Seal | Crankcase | [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

BRAKE CALIPER SET BGM PRO RADIAL suitable for VESPA PX -MAXIMUM DECELERATION WITH MAXIMUM SAFETY- BRAKE CALIPER BGM PRO 4-PISTON RADIAL The BGM PRO 4-piston brake caliper increases the effective piston and pad surface of the front brake system and thus enables braking performance at motorcycle level. With 4x25mm brake pistons, the BGM PRO brake caliper has 40% more piston area than a conventional two-piston brake caliper [...]