Perfectly coordinated carburetor kit. The scope of delivery includes the bgm PRO 17 carburetor, the bgm PRO intake manifold, sport membrane and all the small parts required for assembly. The bgm PRO carburetor is super easy to tune. The PHBN series is widespread and so all tuning parts are easily available. The open BGM PRO intake manifold fits perfectly onto the carburetor [...]

The BGM PRO SC shock absorber series is one of the finest chassis components that you can treat your scooter to. CNC machined, high-strength aluminum (6061) which is finally equipped with an absolutely corrosion-resistant hard anodized coating, form the basis for the high-end chassis. The very stable piston rods are machined in an extremely complex manner in order to obtain perfect surfaces with ideal sliding properties. Thereby [...]

BGM 50ccm replacement cylinder. Replacement for all water-cooled Peugeot Jet Force from 2013 and Speedfight 3 and Speedfight 4 scooters. The BGM cylinder is delivered in a kit with piston, piston rings and sealing kit. The original cylinder head from the Peugeot Speedfight 3 & 4 LC and Jetforce C-Tech can still be used. Replaces the Peugeot OEM number T 777327 [...]

Conversion wiring harness for retrofitting to: PX alternator or PX engine in Rally, Sprint, VBB, Super, VNA, VNB, etc. PK alternator or PK engine in V50, Primavera, ET3, V90 etc. The conversion to a more modern alternator / Ignition type is a tried and tested means of traveling more permanently and safely. So the non-contact CDI ignitions are almost indestructible [...]

bgm PRO wiring harness for all Lambrettas with electronic ignition. The wiring harness is made with as few cables as possible, so it corresponds to the ideal of minimal electronics. The wiring goes to CDI, voltage regulator, headlight connector in the steering head, brake light switch and taillight. There are no annoying clipboards. A piece of bougier tube for the cable branch of the ignition base plate is included in the scope of delivery. The wiring harness [...]

bgm - Item number: BGM6477TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 7mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

Kickstater shaft for Peugeot, Honda and Kymco In very good OEM quality bgm - Item number: 06555741 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Gearbox> Kick starter shafts Other customers who are interested in kick starter shaft -BGM ORIGINAL- Peugeot 50 cc, Honda 50 cc, Kymco 50 cc, [...]

Air jet set specific for the Dell'Orto carburetor SI24 / 24G (e.g. Vespa T5). The carburettors specified with the ending 'G' have a lower overall height than those with the suffix 'E' or 'D'. For this reason, shorter auxiliary and air jets are used in the 'G' carburettor types. The T5 models almost exclusively have an air jet of size 120 ex works.

Precisely manufactured shift pin for all largeframe transmissions from approx. Year of construction 1984 - Vespa PX, T5, Cosa, Motovespa TX. Always used with a flat type switch cross. If a non-flat switch cross is installed in your engine and a washer is also installed between the switch bolt and the switch cross, the bolt shown here cannot be used. You have [...]

BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

Small upgrade kit for the primary transmission of all PV125, ET3, PK80-125 S / XL / XL2 motors. The set massively strengthens the primary drive, making it durable for powerful engines. The massive CNC-milled cover disc effectively prevents the thin standard discs from breaking through and thus holds the shock absorber springs in place. Also available as a large upgrade kit with [...]