BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM8015W Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Clutch> Ball bearings Other customers who are interested in disc for axial needle roller bearings AXK 1024 / NTB 1024 - AS 1024- (10x24x1mm) - (used for clutch pressure plate BGM8015) are also looking for: needle roller bearings [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

BGM clutch pinions are bulletproof. Developed for the enormous power and torque of today's engines, they are made from high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high [...]

Brake pads -bgm Pro-. Among others for the following models: Derbi Vamos (v) Italjet Formula 50 97- (v + h) Dragster 50 (v + h) Peugeot Elyseo 50 (v) Speedfight 50 LC (v + h) Squab (v) Zenith (v ) Suzuki Katana (r). Sintered brake pads are a new generation of pads. They are all-metal brake pads that are manufactured in a complex sintering process. With these [...]

Shock absorbers from the BGM PRO SC series are THE coilover kit for Vespa with TÜV! The chassis developed by BGM in Germany is available with an ABE for almost all Vespa scooters. The shock absorbers are fully adjustable and offer an incomparable driving experience that was previously unknown on a scooter. with ABE individually [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

bgm - Item number: BGM6610GR Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,66 kg Category: Motor> Rubber parts> Hoses Other customers who are interested in radiator hose set -BGM PRO silicone 180 ° C- Vespa GT 125-200, Vespa GTL 125-200, Vespa GTS 125-300, Vespa GTV 125-250 - green are interested, also looked for: [...]

bgm - Item number: BGM4952 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,72 kg Category: Frame> Body> Main stand Other customers who are interested in main stand -BGM PRO Soft Stop System- Vespa Largeframe Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), GT / GTR125 (VNL2T), TS125 (VNL3T), GL150 (VLA1T), VNB2T to VNB6T, [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set can be used on almost all Vespa largeframe models: Vespa [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 34 / 34mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]