We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

IGNITION CABLE BGM PRO SILICONE 7MM The BGM Pro silicone ignition cable is a real professional product. The tinned copper wire with 1,5mm² enables a powerful spark under every condition. It is suitable for retrofitting on every motor and offers the following advantages compared to a standard PVC cable: High voltage resistant up to over 50000V (50kV) Heat resistant up to 200 ° (fire protection class FT-1 / VW-1) Copper core [...]

New version of the popular BGM ORIGINAL rims The bgm Original V2.0 rims are precisely manufactured and have an exact concentricity. High-quality stud bolts and nuts make them the perfect, higher-quality alternative to the Piaggio original rims. The bgm original rims have a subtle bgm logo and an embossed size indication. The rims can be used with [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

BRAKE CALIPER MOUNT 'TOURING RADIAL' BGM PRO FOR LML Star / Stella Professional brake caliper mount from BGM PRO 'Made in Italy'. Enables the assembly of the radially attached BGM PRO 4-piston brake caliper. With fine controllability, this enables braking values ​​at motorcycle level. MAXIMUM DECELERATION A special feature of the BGM PRO brake calliper adapter is its uncompromising design for the greatest possible deceleration. The brake caliper was [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]

bgm - Item number: BGM1550G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Seals Other customers who are interested in cylinder seals -BGM PRO 150 ccm, wideframe , Faro Basso, Ø = 57mm, stroke = 57mm- Vespa 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T are also looking for: [...]

The BGM PRO assembly kit for handlebar end mirrors can be used universally for all motorcycles and scooters. With the adapter, a handlebar end mirror can be mounted quickly and easily. No modifications to the fittings or the handlebars are necessary. (Vehicles whose rubber grips are still closed at the end can be equipped with open grips or, alternatively, the existing grips with [...]

bgm - Item number: BGM6488X Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frame> Wheels> Clamping nipples and screw nipples Other customers who are interested in clamping plate set front brake -BGM ORIGINAL Vespa all models (-1981), PX (-1984) - 10 pieces are of interest, also looked for: clamping plates | Set [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]