The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for converting from contact ignition to electronic ignition. Suitable for eg Vespa VNA, VNB, VBA, VBB, GL, Super, Sprint, GT, GTR, TS, Rally ADVANTAGES ELECTRONIC IGNITION Specially developed for converting contact-controlled motors to a maintenance-free electronic ignition. After the upgrade, the former weak [...]

bgm PRO stud bolts (tie rods) for fastening the cylinder and cylinder head to the engine housing of all Lambretta series 1-3 models. High strength and with solid collar nuts in an extra high design. Perfect for all powerful cylinders that require a solid engine base. In principle it can also be used on Vespa 180-200cc engines. As a rule, however, these are for the use of the original Piaggio bolts [...]

bgm - Item number: BGM0330 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (10x14x13mm) - Minarelli 50 cc, Morini 50 cc (type AH) are also interested in: connecting rod bearings | Needle roller bearings | Piston pin bearings | Kobo [...]

Professional oil filter wrench that makes the dismantling / assembly of the oil filter cartridge much easier and safer. The tool encompasses the filter cartridge and offers a secure hold. Slipping, as with tools from other manufacturers, is reliably prevented. Heavy workshop quality No more slipping possible, even with great effort, safe to use Galvanized For 1/2 inch drive (large ratchet) bgm - item number: [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Lambretta cylinder head gasket with 1,5 mm thickness and 65,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0241 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width on the air filter is [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]