The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

bgm - Item number: BGM6010S24 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 2,40mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The bgm PRO assembly stand is ideal for maneuvering the scooter when its engine is removed. The assembly stand acts as a maneuvering aid and makes the scooter chassis extremely manoeuvrable thanks to the smooth-running industrial castors (shopping cart principle). To do this, the assembly stand is simply attached to the mounting points of the motor (the corresponding bolt for attaching is of course included). The scooter thus receives [...]

The main shaft of the GS 160 and SS 180 is held by such a castle nut. Wedi seat 40mm. bgm - Item number: BGM5440 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are interested in castle nut rear wheel bearing- BGM Original -VESPA Øi = 40mm, [...]

bgm - Item number: BGM1770BS15 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are looking for Spacer cylinder base -BGM ORIGINAL 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 1,5mm interested, searched [...]

BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

bgm - Item number: BGM2220HS07 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 65,0 , 8mm 125-way screw connection - Lambretta LI 150-125, LIS, SX 150-175, TV 2 (series 3-125), DL / GP 150-0,7 - XNUMXmm [...]

BGM PRO Oversize screw / clamp nipple in excellent quality, manufactured by a supplier for the Japanese motorcycle industry. The BGM PRO Oversize types have five special features: Production to oversize (Ø10.06mm) Stepped collar at the upper end With a wrench surface to hold against (SW = 9mm) With 3.5mm hexagon socket (like original Innocenti) With internal clamping plate to protect the train OVERSIZE The [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Lambretta cylinder base gasket with a thickness of 2,0 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]