bgm - Item number: BGM6408FBI Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frames> Cables> Cables Other customers who are interested in brake cable front inside -BGM ORIGINAL Superstrong Ø2,5, 1730mm (l = 2mm) - Lambretta LI, LIS, SX, TV (Series 3-XNUMX) are interested, also looked for: Brake cable | Brake cable | [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

With the Sport and Competition line, BGM Pro has two high-quality shock absorber series in its delivery program. Both have in common the perfect workmanship, the high material quality and approval by means of ABE. Despite their high resilience, the dampers are very light, as they are made of high-strength CNC aluminum and have excellent surface protection made of hard anodized aluminum. The front [...]

High quality new edition of the cable box for the classic Vespa PX models built up to 1984 and the Sprint Veloce models, both with battery. Not available from Piaggio for a long time, we had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. NOTE: Also available for PX models up to 1984 without [...]

The BGM BigBox Touring - power for the big tour Torque from idle with the optics and acoustics like a standard exhaust. The BGM BigBox Touring is the tour steamer in our range. Developed for full thrust from the lowest revs. Perfect for original engines or cylinders whose power is applied early, e.g. Polini, Malossi Sport, Pinasco. One [...]

BGM PRO CDI for IDM retrofit ignitions -original optics in connection with an optimized ignition curve for touring engines- THE PROBLEM OF ORIGINAL IDM CDI ON TOURING ENGINES All IDM-based ignitions (Vespatronic, Malossi VesPower, Polini IDM, Varitronic, Pinasco Flytech, Parmakit etc.) use the same CDI. Their ignition curve is designed for high-performance engines with late performance and high speeds. [...]

Mixture adjustment screw without spring for bgm PWK, Keihin PWK and Stage6 PWK carburetors bgm - item number: BGM8507 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM for PWK- (bgm, Stage 6, Keihin) were also looking for [...]

BGM PRO CDI for IDM retrofit ignitions -original optics in connection with an optimized ignition curve for touring engines- THE PROBLEM OF ORIGINAL IDM CDI ON TOURING ENGINES All IDM-based ignitions (Vespatronic, Malossi VesPower, Polini IDM, Varitronic, Pinasco Flytech, Parmakit etc.) use the same CDI. Their ignition curve is designed for high-performance engines with late performance and high speeds. [...]

We were so dissatisfied with the quality of all silent blocks that we took on the matter. The main focus was on reducing vibrations, and we tested all possible combinations of silent blocks. Different hardnesses and different hardnesses on the left and right side. We now have good degrees of hardness for the left and right side [...]