BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

TIP: Please always assemble piston rings carefully. Piston rings made of cast material are only elastic to a limited extent and break relatively quickly. Some pistons have trapezoidally profiled piston rings (so-called keystone rings), these only fit in one installation position. If the ring does not move freely, please loosen it carefully and put it back in 'upside down'. Very helpful tools for work [...]

bgm - Item number: 4350002 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frames> Cables> Cables Other customers who want universal train inside -Ø = 1,2mm x 2500mm, nipple Ø = 3,0mm x 3mm- used as throttle cable - turned interested, also looked for: Zug | Universal | [...]

bgm - Item number: BGM6396UG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,16 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -BGM ORIGINAL, Ø = 1.2 mm x 2500mm, sleeve = 2200mm, nipple Ø = 3mm x 3mm, inner sleeve PE, braided cable, gray - used as a throttle cable interested, searched [...]

Carburetor revision sets from BGM PRO contain high-quality spare parts to restore an existing carburetor to its factory condition. In addition to the seals, the set also contains the very important float needle. This ensures that the carburetor does not overflow and the engine has a stable idle. TIP: For a perfectly sealing surface, the float needle seat (usually made of brass [...]

bgm - Item number: BGM2710 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 3,93 kg Category: Frame> Seat> Seat covers Other customers who are interested in seat covers -BGM PRO- LAMBRETTA- LI , TV (Series 2) - Red Beige are also interested in: Seat cover | Coating | Seat cover | Seat cover [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Premium quality! The side panel rubber of the PX series differs in the thickness of the rubber profile. Basically interchangeable, the so-called PX Lusso model series (from year of construction 1984) uses significantly thicker rubber side panels. Their profile covers more area, both on the side panel and on the frame. Since there are no side panel rubbers in decent quality at a reasonable price on [...]

Cylinder base gasket -BGM PRO- 1,5mm Malossi 139ccm & 166ccm bgm - item number: 3820038 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers, who are interested in spacer cylinder base -BGM ORIGINAL Malossi 139/166 ccm- Vespa PX80, PX125, PX150 - 1.5mm, were looking for [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Suitable unplanned bgm RD membrane, for all Lambrettas with TS1 cylinders. Perfect combination of excellent durability with high performance! When using a packing plate with the bgm PRO membrane block, no milling of the TS1 inlet is necessary. bgm - Item number: BGM2550A Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 [...]