bgm - Item number: BGM2105U4EM Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,03 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust manifolds -BGM PRO Clubman V4.0 - Lambretta series 1-3 - silver, also looked for: exhaust manifold | Elbow | Exhaust flange | Exhaust manifold [...]

The PK125 series offers some special features on the engine side. The PK125S still has the small crankshaft type with the small, pointed 19mm cone of the Primavera and ET3 models. The PK125ETS and PK125XL2 have a larger bearing seat (25mm) on both the shaft and in the crankcase than all other smallframe models. The cone, however, is identical to that of the [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

Carburetor kits specially put together for the RaceTour Lambretta cylinders. The carburetor kits are based on the Polini carburettors and our bgm PRO intake manifold. The nozzle comes with an MB rubber rubber and offers the maximum possible distance between the carburetor and the side panel. The carburetor sits as well as in the original position and is also straight. The original or [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Stud set BGM Original for cylinder assembly of the Vespa 80-150ccm smallframe and largeframe engines. Made of high tensile strength steel with a rolled (rolled) thread. In contrast to a cut thread, the surface is firmer and the thread flanks are press-polished. This results in a highly resilient and permanently durable thread. Tightening torque cylinder head screws: 13-15Nm (aluminum cylinder) Tightening torque cylinder head screws: 14-18Nm (cast iron cylinder) Scope of delivery: [...]

bgm - Item number: BGM2220HS20 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 65,0 , 8mm 125-way screw connection - Lambretta LI 150-125, LIS, SX 150-175, TV 2 (series 3-125), DL / GP 150-2,0 - XNUMXmm [...]

The Fast Flow petrol taps have a high flow rate and ensure a perfect supply of fuel to the carburetor even on powerful engines. They can be exchanged 1: 1 for the original fuel tap. The fuel tap is available in these variants: TYPE WITH RESERVATION The version with reserve position corresponds to the functionality of a conventional fuel tap (open / reserve / closed). Here is [...]

BGM PRO Superstrong clutch linings type CR Suitable for retrofitting all clutches of the COSA2 type (exception: BGM Superstrong CR) for Vespa Largeframe (PX / Cosa / T5, Rally etc.) This CR lining set contains: 3x clutch disks with two sides, 1x clutch disc with one side it is suitable for all Vespa largeframe clutches of type COSA2 (exception: BGM Superstrong CR) [...]

The BGM PRO assembly kit for handlebar end mirrors can be used universally for all motorcycles and scooters. With the adapter, a handlebar end mirror can be mounted quickly and easily. No modifications to the fittings or the handlebars are necessary. (Vehicles whose rubber grips are still closed at the end can be equipped with open grips or, alternatively, the existing grips with [...]

Open intake manifold for all Piaggio scooters with 2-stroke engine housing (50cc, 125cc, 180cc). The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher top speed! Due to the changed installation position of the carburetor, the original connection hose to the air filter box can no longer be used. With a Ø30mm connection width, [...]

The LEDs for the rear lights and indicators slumber peacefully under the clear glass. Once switched on, you will no longer recognize your runner. The super bright diodes make for a worryingly aggressive look. Everything else can wrap up! bgm - Item number: BGM5015WL Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: [...]