bgm - Item number: BGM6413ST Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frames> Cables> Cables Other customers who are interested in choke cables -BGM ORIGINAL- Vespa PX Lusso ( from 1984) - interested in black, also looked for: Choke cable | Cold start train | Cold start | Choke cable | [...]

bgm - Item number: BGM2225HS20 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 2,0 - XNUMXmm are interested, also looked for: Spacer | [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]

bgm - Item number: 3330399 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug ring eyelet 4,5mm Ø = 1,0 -1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | Round connector | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Some Malossi V-One / VR-One motor housings have very deeply drilled receptacles for the silent rubbers in the crossbeam. To prevent the motor from moving sideways and possibly touching the chassis, we offer appropriate spacer bushes. ASSEMBLY These spacers are first inserted into the housing and thus replace the original steel disks, as they are also in the Piaggio engine housings.

bgm - Item number: BGM2105U4DP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust manifold -BGM PRO Clubman V4.0- Lambretta series 1-3 - unpainted interested, also looked for: exhaust manifold | Elbow | Exhaust flange | Exhaust manifold | [...]

Clutch linings are a very important link between the engine and the transmission. A well-functioning clutch is essential for driving fun, safety and performance. Unfortunately, many manufacturers do not make the appropriate effort with such an important component with the result that the clutches go through or do not separate properly. The covering manufacturers deliver the proper quality [...]

bgm - Item number: BGM7987 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,77 kg Category: Frames> Wheels> Rims Other customers who wanted rims -BGM PRO tubeless 2.10-10 inches Aluminum Vespa (type PX) - Vespa Smallframe V50, 50N, Special, PV, ET3, PK50-125 (S / XL / XL2), Largeframe PX, T5, [...]

bgm - Item number: BGM0223S25 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,08 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 2.5mm are interested, also searched for: Spacer | Cylinder base | Distance seal | [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]