MAIN IMPORTERS

CENTRAL EUROPE

THAILAND

ITALIAN

JAPAN

UNITED KINGDOM

NORTH AMERICA

SPAIN

RANDOM PRODUCTS

bgm - Item number: 3330401 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug ring eyelet 6,5mm Ø = 1,0 -1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | Round connector | [...]

bgm PRO fan wheel completely developed and manufactured in Germany. This is a one-piece fan wheel without rivets or screws. Technology of the 21st century with an almost original look and design. The fan wheel has been successfully tested up to 24.000 rpm and gives the highest alternator performance with the bgm V3 ignition base plate. Features: Moment of inertia 6240 kg mm² (-5%) [...]

bgm - Item number: BGM9011 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,30 kg Category: Frame> Brakes> Brake cams Other customers who are interested in brake cams front -BGM ORIGINAL- Vespa PX ( Bj. 1984-1998), T5 125ccm, PK50 HP (V5N2T), PK50 (V5X1T), PK50 S (V5X2T), PK80 S (V8X5T), PK125 S [...]

Special tool - Made in Germany Assembly tool for bearing types NBI253815 and B188. Suitable vehicles: Vespa PX, Cosa, T5, Sprint Veloce, PK ETS Is used to mount the needle bearing cage of the crankshaft / main shaft bearing in the small engine housing. Heat the motor housing and drive the bearing into the housing with light blows (without tilting). TIP: The ideal addition is our recoil-free [...]

Speedometer glass incl. Decorative ring WHAT FOR Perfect repair kit for the speedometer. Either to replace a scratched / defective glass or to visually upgrade the speedometer. We also offer the sets in various designs. In our opinion, the tinted glass looks particularly elegant. HOW In the set is the speedometer glass ring that connects the speedometer glass and the speedometer [...]

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers only have a slightly increased degree of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm motorsilent rubbers, the chassis gains directional stability, steering precision and rigidity. The assembly is simple and offers eg [...]

The BGM Superstrong for Lambretta already has a "built-in" clutch compressor system. The Superstrong coupling can be easily compressed with just two screws and long nuts. On the face of the coupling spider, two of the legs are marked with a point, at the bottom of which is the threaded hole for the screw. Here the screws are used for pre-tensioning [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

bgm 50ccm aluminum cylinder, including cylinder head. High quality cast aluminum cylinder with a very resistant Nikasil coating. Aluminum is thermally superior to conventional gray cast iron, as it emits the heat generated by the combustion process in the cylinder much better. It is not for nothing that all high-end cylinders are made of this material. A material that can withstand such extreme loads as [...]

bgm - Item number: BGM6606GTS Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Electronics> Turn signals Other customers who are looking for cable adapter kit for turn signal conversion -BGM PRO update 2003-2013 => 2014- Vespa GTS 125-300 rear - used for indicators from 2014 onwards in vehicles before 2014 are interested, [...]

We also offer so-called conversion rubbers. This allows you to bring different connection widths of carburettors and intake manifolds together. bgm - Item number: 1110022 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Rubber parts> Carburettor connection rubbers Other customers who are interested in carburetor connection rubber / intake manifold -BGM ORIGINAL Conversion - [...]

bgm - Item number: BGM4508 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, short (130mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - chrome are interested, also looked for: brake levers | Brake handle [...]