Set di fissaggio per il cavo contachilometri -BGM ORIGINAL- contachilometri italiani e spagnoli Lambretta LI (3a series), LIS, SX, TV (3a series) bgm - Item number: BGM6402SN Availability: in stock (Please check availability here in the Scooter Center Shop ) Weight: approx. 0,00 kg Category: Frame> Fork> Speedometer cables Other customers who are interested in mounting sets [...]

Seat cover for the standard Lambretta seat frames. The cover is covered with Alfatex on the side and top of the middle part. The bench, which was handcrafted for us in Italy, is lined with foam. This guarantees a high level of comfort even on long journeys. One of the two two-cylinder prototypes from Innocenti is equipped with a bench like this one [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

bgm - Item number: BGM6397UG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -BGM ORIGINAL, Ø = 1.2 mm x 2500mm, sleeve = 2200mm, nipple Ø = 5.5mm x 7.5mm, inner sleeve PE, braided cable, gray - used as a throttle cable interested, searched [...]

bgm - Item number: BGM2105FKT Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust flange kit including bracket, springs and Clamping hook -BGM PRO Clubman V2-V3-V4- Lambretta series 1-3 - type gray cast iron and TS1 are interested, also looked for: Big [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. The pear nipples used with the brake / clutch cable require a corresponding adapter to fit into the round cutout of the handlebar. Unfortunately there are no [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

BGM Pro Spezial crankshaft with the hub and connecting rod of the 50ccm models (43mm / 87mm) combined with the large alternator stump (Ø24 / 25mm) of the PK125 ETS models. Most stable 50cc crankshaft on the market, fits into every smallframe housing with the appropriate bearing: V50, PK S, PK XL, PK XL2! For conversion bearings see accessories. Suitable for the following engines to use cylinders for V50 / PK50 [...]

bgm - Item number: BGM6484 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Brakes> Nuts Other customers who are interested in knurled nut brake cable -BGM ORIGINAL M6 x 1,0, 10mm, SW5- brake cable front Vespa PK, brake cable rear Vespa T125 XNUMXccm, conversion Vespa PX are interested, also looked [...]

Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]