BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

bgm - Item number: BGM7913S Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Gearbox> Screws Other customers who are interested in screw -M10 x 160mm- steel 8,8, 7913 galvanized - used for BGMXNUMX interested, also looked for:

Consists of the following parts: 8010450 Spacer sleeve, ball bearing, front brake drum -LAMBRETTA- LI, LIS, SX, TV, DL, GP 2x 3710010 Ball bearing -6201 2RS (encapsulated on both sides) - (12x32x10mm) - (used for front wheel Lambretta all) 8010270 Shaft seal 17x32x7mm - (used for front wheel Lambretta LI, LIS, SX, TV, DL, GP, J50, J100, J125, Lui) 9000047 Circlip -BORING DIN472- Ø = 32mm 8010400 Shaft seal [...]

Gasket set cylinder Peugeot 50 AC bgm - Item number: R100689030 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Seals> Gaskets Other customers who are interested in gasket set cylinder -BGM ORIGINAL 50 cc- Peugeot 50 cc AC (vertical) - SPEEDFIGHT1 50 cc AC, SPEEDFIGHT2 50 [...]

BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482S Availability: in stock [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Kyajet - PWK tuning tool (click) bgm - Item number: 2599132 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Carburetor> Carburetor needles Other customers who for needle set -BGM PRO XL- suitable for Keihin / Stage6 / bgm / Koso PE20, PWK24, PWK26, PWK28, PWK30 (HKJ, HLJ, JJK, JJL, JJM, [...]

Open intake manifold for Minarellis with upright cylinder Intake manifold with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). Decent increase in performance, as the engine can finally breathe freely. The result is better acceleration values ​​and freer turning and thus higher top speed. bgm - Article number: A201 Availability: on [...]

bgm - Item number: 7674550 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Spacer Other customers who wanted spacer set clutch cover -BGM PRO 4- Teilig- V50, PV125, ET3, PK50, PK80, PK125 - 1.5mm are interested, also looked for: Spacer | Set | Clutch cover | [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

Perfectly matching new edition of the leg shield edge protection for the Vespa PK50 S, PK80 S, PK125 S and PK125 ETS models. The PK S / PK ETS models have, compared to all other models, an inverted flanging of the leg shield edge. The PK S / ETS-specific edge protection was therefore not available for years. The edge protection is available in: Silver (PK S [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]