bgm - Item number: BGM8010NA Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutch cover plates Other customers who are interested in clutch cover plate -BGM PRO Superstrong- Lambretta LI, LI S, SX. TV (series 2-3), DL / GP interested, also searched for: clutch cover plate | Cover disk | Cover plate | [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

bgm - Item number: SCK1801XXL Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Clothing> T-Shirts Other customers who are looking for T-Shirt -BGM Supercharged- black - XXL interested, also searched for: Tshirt | Maglietta | Tshirts | Clothing | Present | Gift | Gift idea | [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

CARBURETOR TUNING SET BGM FOR DELL'ORTO PHBH28 / PHBH30 Tuning set for the classic Dell'Orto PHBH series or its replicas (YSN) SCOPE OF DELIVERY Main nozzles: 130,135 Auxiliary nozzles: 58,60 Mixing tube: AS266 Needles: X3, X7, X13 The set offers a very good one Basic set-up for almost all tuned Vespa / Lambretta engines. MAIN JET The main jet oscillates around 130-135 in most engine setups [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The auxiliary nozzle of the SI carburetor does not have the simple function of a conventional nozzle, ie the pure regulation of the amount of fuel. With the introduction of the PX in 1977, the previously used SI carburettor type and its auxiliary nozzles were modified. The old carburetor types, such as those still used in the rally engines, had a separate air duct for the auxiliary nozzles. [...]

Disc brake made in Germany with braking torque support (Antidive). This effectively prevents the annoying bottoming out when braking. This means that the large braking force of the disc brake can be used optimally. The Antidive also enables the assembly of softer fork springs, as these no longer have to absorb a bottoming out due to the high braking torque. This improves driving behavior and comfort [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: BGM0233S1010 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for spacers cylinder base -BGM ORIGINAL for Polini Evolution 133ccm, Parmakit SP09 130ccm, 135ccm, Parmakit Evo (-C) 135ccm- Vespa V50, PV125, ET3, PK50, PK80, PK125 [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]