Tuning cylinder 150ccm BGM PRO suitable for Vespa VM, VN, VB1, VGL1, VL1 BGM PRO cylinder with 150ccm with 57 mm stroke suitable for all 2-channel engines. The cast iron cylinder has three transfer ports and is suitable for all wideframe motors with a 57 mm stroke. The cylinder with the 125 mm crankshaft fits on the 54 cc engines with 57 mm stroke.

bgm - Item number: 3330039 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM PRO 166/172 / 177 cc- Vespa PX80, PX125, PX150 - 4.0mm (without cut-outs for overcurrent channels), also looked for: Spacer | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

High-quality CNC sports levers from bgm PRO for vehicles with cable brakes at the front. Suitable for Vespa Largeframe models built in 1957-1998: PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180 Smallframe built in 1963-1989: V50, 50N, V90, PV125, ET3 , PK S *, PK XL1 * Milled from solid aluminum, with an elegant, resistant, hard-anodized surface. Ergonomically clear [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

The pole wheel of the V50, PV125, ET3 etc. is flatter than that of the later PK models. Anyone who converts their engine to modern ignition technology (or swaps the entire engine) will no longer get the old original fan wheel cover installed. This is where our spacer comes in, which separates the cover from the pole wheel. Simply place between the cover and the motor housing [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

bgm - Item number: BGM0902EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 60mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

bgm - Item number: BGM7929TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Tools Other customers who are interested in castellated wrenches clutch nut -BGM ORIGINAL- Vespa Largeframe ( up to 1995), also searched for: Crown nut wrench | Coupling nut | Crown nut wrench | Clutch tool | Wrench | [...]