Universal fuel tap (hose fuel cock) for fuel hoses with 6 or 8 mm inner diameter. Impressively simple fuel tap solution! bgm - Item number: 8006594 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM ORIGINAL- universal hose fuel tap - Ø = 6mm interested, looked [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM PRO CDI for IDM retrofit ignitions -original optics in connection with an optimized ignition curve for touring engines- THE PROBLEM OF ORIGINAL IDM CDI ON TOURING ENGINES All IDM-based ignitions (Vespatronic, Malossi VesPower, Polini IDM, Varitronic, Pinasco Flytech, Parmakit etc.) use the same CDI. Their ignition curve is designed for high-performance engines with late performance and high speeds. [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

BGM abutments are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Innocenti. This guarantees a perfect fit. The abutments are required to give the outer cable casing a stop on the frame or in the engine block. They are simply inserted into the corresponding hole. Uses [...]

Carburetor -PHBN 17,5- Minarelli 50ccm - manual choke. The PHB carburettors are a constant in the scooter sector. They are characterized by easy assembly and good tunability. If a DellOrto PHB carburettor is already installed on the vehicle, changing to a larger one of the same type is possible without any problems. The PHB 17,5 mm [...]

bgm - Item number: BGM0291HS08 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø46mm- Vespa P80X , PX80, PX80E - 0.8mm, also searched for: Spacer | Cylinder head | Distance seal | Distance | [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1206TL Availability: in stock (Please check the [...]

Ignition coil -BGM PRO- Peugeot 50-100ccm, Honda 50ccm, Kymco 50ccm. bgm PRO Racing ignition coil with high-end secondary winding. With this coil, the secondary voltage is almost doubled. The standard ignition voltage of the original ignition coil is around 16.000V. With the race high tension coil ignition coil from BGM PRO we achieved an ignition voltage of a full 31.000V !!! The advantage is [...]

High-quality CNC sports levers from bgm PRO for vehicles with cable brakes at the front. Suitable for Vespa Largeframe models built in 1957-1998: PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180 Smallframe built in 1963-1989: V50, 50N, V90, PV125, ET3 , PK S *, PK XL1 * Milled from solid aluminum, with an elegant, resistant, hard-anodized surface. Ergonomically clear [...]