bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width on the air filter is [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

bgm PRO MRB cylinder head for pistons with 70-71 mm diameter. The head is CNC milled from solid material in Germany. The area of ​​the cooling fins is significantly increased compared to the Italian, Indian, Spanish and most other heads. This leads to significantly higher heat dissipation and better cooling. The head is warp-proof with extra [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

Practical quick coupling that is mounted in the fuel hose. If, for example, the tank or the carburettor is to be removed, the hose at the coupling is disconnected. The internal valves prevent fuel leakage on either side of the clutch. They can be separated quickly at the push of a button with just one movement and can be easily closed again by sticking them together. [...]

Tuning kit to convert PX125 / 150 (and similar) engines to 177ccm. The set includes: cylinder kit BGM Pro 177 exhaust BGM Pro touring carburetor SI24 BGM Pro main jet set It is intended to obtain the best possible combination of power, torque and service life based on the series engine. The set can be used without further adjustment work (no milling, turning or grinding necessary).

bgm - Item number: BGM2506PDC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,11 kg Category: Frames> Brakes> Brake pads Other customers who are interested in brake pads -BGM PRO SPORT- suitable for BGM PRO 4-piston radial brake caliper are also looking for: Brake pads | Baking | Toppings | Brake | Brake lining [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

BGM PRO universal choke cable. Anodized metal housing with the possibility of direct screwing in a hole or alternatively to be clamped on the side with the supplied aluminum clamp. Plastic operating knob. Screw-on housing that has a screw nipple inside. This means that the inner cable can be perfectly adjusted to the required length. Available with 50cm and 150cm cable lengths. 50cm cable length [...]

Cable harness BGM ORIGINAL suitable for all Vespa PX models up to year of construction 1982 Italian version without battery. With this, the indicators, the horn (so-called buzzing) and all other consumers are supplied with power directly via the AC on-board network. The ignition base plate used in these vehicles is suitable for this with only 3 cables (contact ignition models) or 5 cables (vehicles).

bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width on the air filter is [...]

BGM PRO STREET transmission oil SAE30 * - API GL3 Classic single-grade oil, as prescribed by Piaggio for all Vespa manual motors. Covers everyday load conditions perfectly and is ideal for series engines through to high-end tuning engines. Mildly alloyed, ideally suited for oil bath clutches Well-adhering, pressure-resistant lubricating film Excellent oxidation stability Wear-inhibiting * The specification SAE30 refers, differently [...]