BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6495S20 Availability: in stock (Please [...]

Bench cover and Casa Lambretta Series 3 bench frame - fits all Lambretta of the Li family. The cover is covered with Alfatex on the sides and top of the middle part. The bench, which was handcrafted for us in Italy, is lined with foam. This guarantees a high level of comfort even on long journeys. One of the two two-cylinder prototypes [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

Universal fuel tap (hose fuel cock) for fuel hoses with 6 or 8 mm inner diameter. Impressively simple fuel tap solution! bgm - Item number: 8006601 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM ORIGINAL- universal hose fuel tap - Ø = 8mm interested, looked [...]

Cylinder head gasket -BGM PRO- 1,5mm Vespa 200ccm bgm - item number: 3820036 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head -BGM ORIGINAL Piaggio 200 cc- Vespa PX200, Rally200 - 1.5mm, also searched for: [...]

Adjustment screw set, suitable for the derivatives of the Keihin PWK carburetors with small body (24mm - 26mm - 28mm - 30mm) from Stage6, Motoforce, Koso, OKO, etc. Contains both the air screw and the idle screw. Incl. the springs and O-rings / seals behind it. Attention: The idle screw of this set has an M4 thread, therefore not suitable for original [...]

Spacer for the cylinder base. This allows a cylinder to be raised by the specified amount. Intended to compensate for a longer connecting rod, e.g. by installing a modified PX200 crankshaft in a PX125 housing. The 5mm longer connecting rod of the PX200 (110mm) can be perfectly balanced by the spacer. Without cut-outs for the overcurrent ducts to ensure maximum freedom when reworking [...]

The BGM Pro claw is made of high quality 15CrMo5 (SCM415) chrome molybdenum steel and is therefore very robust. The flanks are very tightly tolerated compared to the switching claws otherwise available on the market. This guides the claw exactly in the main shaft and effectively prevents setting / tipping. The profile for locking the gear steps has been greatly improved and [...]

Wideframe shaft seals for the crankshaft are available in two different designs: Round cutout for wideframe engines (material thickness of the sheet metal carrier 0,5mm) Angular cutout for largeframe engines (material thickness of the sheet metal carrier 0,8mm) The version suitable for wideframe with 0,5mm is only available still in no-name quality. The shaft seals fit and there are no problems with distorted bearings. PROBLEM [...]

bgm - Item number: BGM9914G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Seals> Seals Other customers who are looking for cylinder gasket set -BGM ORIGINAL 50 cc- Peugeot LC (horizontal, round cylinder, 2013-) - Speedfight3 50 LC (F1A), Speedfight4 50 LC, Jet Force C-Tech [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]