bgm - Item number: BGM6473 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Workshop requirements> Tools Other customers who are interested in crimping pliers with ratchet function -BGM PRO- for end caps cable Outer shell Ø = 4mm, Ø = 5mm, Ø = 6mm are interested, also looked for: Crimping pliers | Crimping tool | Ferrules | Cable lug | Pliers | [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Is used to mount the split roller bearing of the main shaft in the small engine half (Lima side). Material: 42CroMo4 (1100Nmm² tensile strength!) Surface: blue galvanized [...]

Cracked! A pull rope can digest incredibly large loads. The tear limit of the trains we offer is several tons of pulling force. In a pinch you can even tow cars with it. Why a train breaks anyway depends on the fact that it is loaded incorrectly. Zugkiller No. 1 is the so-called common cast ridge. The brake-clutch levers are often [...]

bgm - Item number: BGM0223S20 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 2.0mm are interested, also searched for: Spacer | Cylinder base | Distance seal | [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]

BGM ORIGINAL countersunk screw for fastening the carburetor pan on the engine. Suitable for all Vespa largeframe engines with rotary valve control up to 1984. The screw used by Vespa to attach the carburetor pan on the engine does not correspond to any common DIN standard. Conventional DIN screws have a countersunk head that is too large, which means that the screw protrudes over the sealing surface. The BGM [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: BGM8090ULGS Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,83 kg Category: Motor> Clutch> Clutch baskets Other customers who are interested in clutch basket including hub (type with cone) -BGM Pro Superstrong CNC Ultralube, type Cosa2 / FL- Vespa Wideframe GS150 (VS1-VS5), GS160 (VSB1T), SS180 (VSC1T) are interested, searched [...]

Cylinder head gasket -BGM PRO- 0,8mm Malossi 139ccm & 166ccm (aluminum) bgm - item number: WS5161 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Malossi 139/166 ccm- Vespa PX80, PX125, PX150 - 0.8mm, [...]