The bgm PRO clutch steel discs are manufactured exactly flat and allow the clutch to be separated precisely. The clutch can be perfectly dosed thanks to the very good concentricity. Perfect concentricity No burrs Good controllability of the clutch Linings separate cleanly Suitable as a replacement for the original steel discs, no modifications necessary. We recommend BGM Pro Street gear oil as a lubricant [...]

Compact voltage regulator for all alternators with 12 volts. The controller supplies alternating current and optionally also direct current. Thus, it is not only the perfect and reliable replacement for all conventional voltage regulators, it also enables a modern expansion of the existing on-board network. AC - AC alternating current: Input and output for the unregulated alternating current of the ignition base plate and the regulated current [...]

bgm - Item number: BGM2310M Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Gearbox> Variomatic slide shoes Other customers who are interested in Vario slide shoe set -BGM PRO- suitable for BGM2311, BGM2312 are also looking for: Vario | Sliding shoe | Set | Sliding shoes | Riser guide | Vario guide | [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you here. In addition to quality bearings, the kit also includes high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are only supplied by Corteco. bgm - Article number: BGM1109 [...]

BGM PRO universal choke cable. Anodized metal housing with the possibility of direct screwing in a hole or alternatively to be clamped on the side with the supplied aluminum clamp. Plastic operating knob. Screw-on housing that has a screw nipple inside. This means that the inner cable can be perfectly adjusted to the required length. Available with 50cm and 150cm cable lengths. 150cm cable length [...]

bgm - Item number: BGM7983 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: Frames> Wheels> Rims Other customers who are interested in rims -BGM PRO, tubeless, 2.10 -10 inch aluminum- Lambretta LI series 1-3, LI S, SX, TV series 2-3 - silver are interested, also looked [...]

England was the only market where Lambretta sales outpaced Vespa sales. The main reason for this is the excellent marketing strategy of the Lambretta Concessionaires. The success story of the Lambretta is documented extensively and in great detail in Stuart Owen's book about the Lambretta Concessionaires (Article No. 3332513). In addition to special models and special color combinations, there was also the Pegasus bench. The was [...]

Exhaust BGM Pro TOURING Banana for Vespa Smallframe V50, 50N / L / R, 50 Special models. (If the frame is modified, it also fits Vespa PK50 models). The BGM Pro exhaust in the TOURING version offers the classic, sporty, discreet look of the famous Vespa SS50 / 90 'banana' exhaust systems, combined with the performance values ​​of a racing exhaust. The touring exhaust system is, according to its name [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: 7674257 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Workshop requirements> Hose clamps Other customers who are interested in hose clamps (10 pieces) -UNIVERSAL- 25-40mm - Are interested in bandwidth = 9mm, also looked for: hose clamp 10

Small upgrade kit for the primary transmission of all PV125, ET3, PK80-125 S / XL / XL2 motors. The set massively strengthens the primary drive, making it durable for powerful engines. The massive CNC-milled cover disc effectively prevents the thin standard discs from breaking through and thus holds the shock absorber springs in place. Also available as a large upgrade kit with [...]