bgm - Item number: BGM77TL2 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Frame> Fork> Tools Other customers who are looking for tools to loosen the lock nut - hook wrench - BGM PRO series are interested in shock absorbers of the BGM PRO SC Sport F1 / R1 series, also looked [...]

bgm - Item number: BGM0233S1010 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for spacers cylinder base -BGM ORIGINAL for Polini Evolution 133ccm, Parmakit SP09 130ccm, 135ccm, Parmakit Evo (-C) 135ccm- Vespa V50, PV125, ET3, PK50, PK80, PK125 [...]

The bgm Pro kick starter pinions are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. They are manufactured exactly according to Piaggio original dimensions. Always consistently high quality. No compromise. LUBRICATION GROOVE As a special feature, the bgm Pro pinions also have a lubricating groove in the [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: ABEBGMSC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are looking for ABE / TÜV certificates for shock absorbers -BGM PRO SC version 2020 are also interested in:

bgm - Item number: BGM6606BRL18 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frames> Electronics> Indicators Other customers who are looking for cable adapter kit for rear indicator conversion -BGM PRO- Vespa GTS125-300 (model years -2018) - for the use of Moto Nostra LED indicators with dynamic LED running lights and taillights [...]

The bgm PRO Racing shaft with 54 mm stroke is the maximum for racing or ambitious road tuning. In contrast to a normal shaft, the cheek diameter has been increased in order to achieve the necessary, higher overlap on the crank pin and thus additional security against rotation despite the increased stroke. This minimizes the risk of twisted cheeks and welding with [...]

Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

bgm - Item number: BGM7707A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Shock absorbers> Shock absorber mountings Other customers who are looking for spring plates for shock absorber springs in front, top fork / swing arm -BGM PRO- Largeframe Sprint (VLB1T), Rally (VSD / VSE), GT / GTR125 (VNL2T), Super (VNC / VBC), TS125 (VNL3T), VNA, VNB, VBA, VBB, [...]

bgm PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The bgm Pro brake shoes are manufactured exclusively for bgm by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. Like the original, the brake disk is made of aluminum. MATERIAL + PERFORMANCE The pad mixture for the bgm PRO brake pad has a high coefficient of friction averaging [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]