BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. The size M7x25mm is suitable for use as an adjusting screw for the rear brake cable on the engine.

We have the BGM original turn signal switch rubber manufactured in excellent material and processing quality as a replacement for the original product no longer available from Piaggio. The rubber is mounted between the handlebar and the turn signal switch. It takes up the round shape of the handlebar and offers the switch a flat surface for mounting. To fasten the indicator switch, two screws M3x12mm [...]

We can now offer you this long-running hit exclusively with a black base. Even more variants to fully adapt your SPDF to your needs! bgm - Item number: BGM5002LBE Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,67 kg Category: Frames> Electronics> Taillights Other customers who are [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Bracket for the horn rectifier on all PX models from approx. 1984 without battery. The holder made of galvanized steel is screwed under the left side cover to the holding frame for the spare wheel. Background knowledge: Since 1982 the alternating current horns used to date (so-called buzzing, the pitch of which fluctuates with the speed of the motor) are no longer allowed. The PX [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers only have a slightly increased degree of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm motorsilent rubbers, the chassis gains directional stability, steering precision and rigidity. The assembly is simple and offers eg [...]

Beautiful bgm PRO Fastback bench for the LUI series. The design is perfect. The bench follows the line of the tank and it almost looks as if no other bench had ever been installed. The processing is at the usual high level of the bench from Italy. The closure is done by a magnetic mechanism

bgm - Item number: BGM2110 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Motor> Gearbox> Variomatic weights Other customers who are interested in weights -BGM ORIGINAL 21x17mm- 12,5g interested, also searched for: weights | Role | Vario roll | Variator roller | Vario rolls | Rolls | Variator | [...]