High-precision BGM PRO auxiliary shaft axis for the bearing of the primary drive of the Vespa PX125-200 models. Here in a complete set including bearings, bearing needles and circlips. This means that a secondary shaft can be completely re-stored. We recommend the BGM locking set (BGM6503NKT) to secure the auxiliary shaft axis. For a comprehensive overhaul, we offer the primary repair kit from BGM (BGM0195F48). This contains reinforced [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as a lubricant. bgm - Item number: BGM6224G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,23 kg Category: Motor> Clutch> Gearbox Other customers who are looking for clutch pinions -BGM PRO- Vespa Cosa2, PX (1995-), BGM Superstrong, [...]

The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]

bgm - Item number: BGM8311L Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Seals> Clutches Other customers who are looking for seals for spacer clutch cover -BGM PRO- Vespa 125, VN1T (60001-), VN2T, Vespa 150 VL1T, VL2T, VL3T, VB1T, ACMA 150 GL (1956-1958) - Ø = 130mm [...]

Carburetor revision sets from BGM PRO contain high-quality spare parts to restore an existing carburetor to its factory condition. In addition to the seals, the set also contains the very important float needle. This ensures that the carburetor does not overflow and the engine has a stable idle. TIP: For a perfectly sealing surface, the float needle seat (usually made of brass [...]

bgm - Item number: BGM0902E Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust spring -BGM ORIGINAL- stainless steel - 60mm interested, also looked for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer | [...]

BGM end sleeves are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old original from Piaggio. This guarantees a perfect fit. End sleeves have a thin shoulder at the end. They are required to fix outer cable shells in the sheet metal of the abutment (in the steering head) to prevent slipping and

This can block the piston. Is often used to adjust the ignition with the reversal measurement method. bgm - Item number: BU4931 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Tools> Tools Other customers who are interested in long piston stoppers -M14 x 1,25- (Type NGK E-candle) - [...]

bgm - Item number: BGM7788SPC Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are looking for spacers for front shock absorber mount -BGM PRO- interested in SC / F16 Sport / Competition (Vespa GTS125-300, Sprint50-150, Primavera 50-150) - 0,20mm, also looked for: Spacer | Spacer plate [...]

bgm - Item number: BGM2220HS10 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 65,0 , 8mm 125-way screw connection - Lambretta LI 150-125, LIS, SX 150-175, TV 2 (series 3-125), DL / GP 150-1,0 - XNUMXmm [...]