BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

Connection rubber -BGM ORIGINAL- with 34 mm connection width. High-quality connecting rubber for carburettors with 34 mm connection width, such as: bgm PWK 24 bgm PWK 28 bgm PWK 30 Keihin PWK 28 Mikuni TM 30 Mikuni TM 27 Dellorto PHBH 28 Dellorto PHBH 30 Dellorto VHST 28 The rubber has an inner one for a perfect fit on each side [...]

Universal tank including fuel tap and approx. 90cm fuel hose. Ideal for the workshop to test vehicles without a tank or removed engines. The valve is designed as a ball valve and has two 'closed' and one (central) 'open' positions. This means that in the event of an emergency, the fuel flow is always safely and quickly interrupted without having to press the lever position of the [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

bgm - Item number: 7671525 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Clutch> Spacer Other customers who are interested in Spacer clutch cover -BGM PRO- V50, PV125 , ET3, PK50, PK80, PK125 - 1,0mm, also searched for: Spacer | Clutch cover | Spacer | Distance seal [...]

Very high quality tool from BGM for dismantling the clutch of all manual Vespa scooters. The tool compresses the springs of the dismantled clutch and ensures that it can be dismantled without danger. Must not be missing in any Vespa tool box! Very nice finish with nickel-plated surface and excellent quality of thread, cone and plate. As a lubricant [...]

bgm - Item number: BGM2581 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Engine> Carburetor> Intake manifold Other customers who are interested in intake manifold for BGM1550 -BGM PRO Ø24mm for Dellorto PHBL24 / 25, Polini CP23 / 24- Vespa Wideframe 125ccm Vespa V1 to V15, V30 to V33, VN, VM, [...]

bgm - Item number: BGM9020TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,38 kg Category: Engine> Exhaust> Tools Other customers who are interested in assembly tool outlet nozzle -BGM PRO- Vespa PX200, GS160 / GS4 (VSB1T), SS180 (VSC1T), Rally180, Rally200, Cosa200 (only with gray cast iron cylinder) were also looking for: Assembly tools [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

bgm - Item number: 7674550 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Spacer Other customers who wanted spacer set clutch cover -BGM PRO 4- Teilig- V50, PV125, ET3, PK50, PK80, PK125 - 1.5mm are interested, also looked for: Spacer | Set | Clutch cover | [...]

The crankshaft of the Vespa PK125 ETS models has the most stable crankshaft stub of all smallframe engines. It has a massive diameter of Ø25mm at the bearing seat on the generator side and is therefore able to withstand all loads. The ETS crankshaft type is therefore very popular for tuned engines. Due to the large diameter, however, the crankshaft cannot be used with the standard [...]