Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]

Allen key especially for the clamp nipple / screw nipple of the clutch and shift cables of all Lambretta models of the LI family Also in a set of 10. available. bgm - Item number: BGM6466TL Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop requirements> Tools Other customers who are interested in Allen keys -BGM PRO- [...]

Light switch for PK / PX Lusso models from 1984, only suitable for vehicles without battery but with horn rectifier. The German Lusso models do not have a battery (with the exception of the Elestart models) and use AC power on the frame. There is a separate rectifier to control the horn (black box under the left side hood with green / black striped connection cables). This [...]

bgm - Item number: BGM2750 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 50mm -BGM ORIGINAL- Vespa Largeframe standard (1957-) were also looking for: engine housing bolts | Motor housing studs | Set | Motor screw set | [...]

bgm - Item number: BGM7987 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,77 kg Category: Frames> Wheels> Rims Other customers who wanted rims -BGM PRO tubeless 2.10-10 inches Aluminum Vespa (type PX) - Vespa Smallframe V50, 50N, Special, PV, ET3, PK50-125 (S / XL / XL2), Largeframe PX, T5, [...]

When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved. Improved features are: Ground pressing surfaces for maximum stability of the joint connection and thus the highest possible security against twisting Ground and coated crankpin Forged connecting rod with CNC finishing [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

The bgm Pro clutch pressure plates are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the plates extremely resistant to wear. The plates are then precisely sanded, so that the pressure pad with a flat and hard surface finds perfect working conditions. The pressure plates are manufactured exactly according to Piaggio original dimensions. Always [...]

Carburetor -PHVA 17,5- Piaggio 50ccm. The PHVA carburettors are a constant in the scooter sector. They are characterized by easy assembly and good tunability. If a DellOrto PHVA carburettor is already installed on the vehicle, changing to a larger one of the same type is possible without any problems. The PHVA 17,5 mm helps all 70s [...]

Carburetor kits specially put together for the RaceTour Lambretta cylinders. The carburetor kits are based on the Polini carburettors and our bgm PRO intake manifold. The nozzle comes with an MB rubber rubber and offers the maximum possible distance between the carburetor and the side panel. The carburetor sits as well as in the original position and is also straight. The original or [...]

Gasket set cylinder Piaggio, Gilera 50 AC bgm - Item number: R100689040 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Seals> Gaskets Other customers who are interested in gasket set cylinder -BGM ORIGINAL 50 cc- Piaggio 50 cc AC are also interested in: Gasket set | Cylinder [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. The pear nipples used with the brake / clutch cable require a corresponding adapter to fit into the round cutout of the handlebar. Unfortunately there are no [...]