If the mirror holes in the handlebar trim of the GTS models from 2016 are to be closed, this is difficult to implement due to the uneven trim in this area. The specially manufactured cover caps from BGM PRO are an optical and technically first-class solution. These are made of the same material as the handlebar cover and exactly follow the design.

bgm - Item number: BGM2220HS12 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 65,0mm 8-way screw connection - Lambretta LI 125-150, LIS, SX 125-150, TV 175 (series 2-3), DL / GP 125-150 - [...]

BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

SEALED connectors are sealed and thus offer a very high level of protection against water, dirt and dust (class IP67). They are perfect for use in areas where temperature, water, oil and gasoline resistance are important. Smaller than the commonly used sealed plugs, the types offered here are perfect for the on-board electronics of two-wheelers.

BGM ORIGINAL countersunk screw for fastening the carburetor pan on the engine. Suitable for all Vespa largeframe engines with rotary valve control up to 1984. The screw used by Vespa to attach the carburetor pan on the engine does not correspond to any common DIN standard. Conventional DIN screws have a countersunk head that is too large, which means that the screw protrudes over the sealing surface. The BGM [...]

bgm - Item number: BGM8020 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,80 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition -BGM ORIGINAL base plate (contact ignition, 3 Cable, 12V) - Vespa 50 N (D), 50 L (D), 50 R (D), 50 Special (V5A2T (D), V5B3T [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm - Item number: SC4013 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Rubber parts> Seals Other customers who are interested in sealing set fuel tap -BGM ORIGINAL- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass fuel tap | [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Exhaust BGM Pro TOURING Banana for Vespa Smallframe V50, 50N / L / R, 50 Special models. (If the frame is modified, it also fits Vespa PK50 models). The BGM Pro exhaust in the TOURING version offers the classic, sporty, discreet look of the famous Vespa SS50 / 90 'banana' exhaust systems, combined with the performance values ​​of a racing exhaust. The touring exhaust system is, according to its name [...]

With the CDI holder from bgm it is possible to install a CDI for the electronic ignition on a Ciao of the first and second series without further modifications. The holder is simply placed under the two motor screws and attached to the motor. The following materials are required for assembly: 1. 4x washers M5x15x1,2mm 2. 2x self-locking nuts [...]