bgm - Item number: BGM2225HS05 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 0,5 - XNUMXmm are interested, also looked for: Spacer | [...]

Ingenious little cable branch that enables the retrofitting of a brake light function on vehicles with disc brakes, even before the year of construction 1998. To do this, screw in a brake light switch on the brake pump (if not already present). The cable branch is suitably pre-assembled to be connected directly (incl. Rubber seal). Lead the cables through the steering head and the inside of the frame to the brake pedal and there in parallel to [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

These are our BGM PRO Superstrong Lambretta front brake cables. They have a strong Ø2,5mm inner cable diameter and a firmly pressed cable holder on the outer shell. Both improve the braking process considerably. Innocenti made a similar modification in May 1966 with the last models of the DL series which were equipped with a disc brake. The cable thickness has also been increased. [...]

Front brake drum 8 "-BGM PRO cast iron- Vespa Wideframe V1-15, V30-33, VU, VM, VN, VL, VB, VBA, VBB, VNA, VNB, ACMA, Hoffmann front brake drum" Made in Germany "by Strohspeed for BGM PRO. Suitable for all Vespa models with 8 inch tires (not Vespa Super VNC / VBC). Made of high quality cast iron, it offers enormous advantages over conventional [...]

bgm - Item number: BGM1550H Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,31 kg Category: Engine> Cylinders> Cylinder heads Other customers who are interested in cylinder head -BGM PRO 150 ccm, wideframe , Faro Basso, Ø = 57mm, stroke = 57mm- Vespa 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T are also looking for: [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

bgm - Item number: BGM78SEC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Workshop supplies> Screws etc.> Screws Other customers who are interested in plastic locking screws -BGM PRO M6x6mm- interested in shock absorbers of the BGM PRO Sport / Competition series also looked for: Shock absorbers | Rear | [...]

bgm - Item number: BGM2099 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Motor> Gearbox> Variomatic weights Other customers who are interested in weights -BGM ORIGINAL 20x15mm- 9,9g interested, also searched for: weights | Role | Vario roll | Variator roller | Vario rolls | Rolls | Variator | [...]