BGM PRO Superstrong clutch linings type CR Suitable for the BGM Superstrong type CR clutch for Vespa Largeframe (PX / Cosa / T5, Rally etc.) This CR lining set contains: 3x clutch disks with two sides 1x clutch disc with one side This makes it suitable for all Vespa Largeframe Superstrong clutches of type CR. NOTE: For Lambretta LTH Liedolsheim and Vespa Smallframe MMW Hartz couplings [...]

Castle nut for: Rear wheel bearings: Vespa 125 - VNA, VNB, GT125 (up to 78300), GTR125 (up to 124013) Vespa 150 - VBA, VBB, VGLA, VGLB, GL150, Sprint (up to No. 1170239), Sprint Veloce (up to No. 169300) Front wheel bearing: Vespa 160GS, 180SS Ø outside: 49mm Ø inside (shaft seal seat): 37mm slots: 9pcs. Height: 12,5mm Suitable tool - article no. 1800018 bgm - Item number: BGM4937 [...]

BGM roller bearings for the engine of the Vespa GS160 (GS4) and SS180 models. Their countershaft and main shaft have special bearing types that have not been available for a long time, or have only been available in questionable quality. The BGM bearings are manufactured by a well-known Italian company and have a closed bearing cage. Thanks to the precise manufacturing and the high quality material [...]

Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

bgm - Item number: BGM2111 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Motor> Gearbox> Variomatic weights Other customers who are interested in weights -BGM ORIGINAL 21x17mm- 13,5g interested, also searched for: weights | Role | Vario roll | Variator roller | Vario rolls | Rolls | Variator | [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: BGM8010NR47 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Gearbox> Sprockets Other customers who are looking for rear sprockets -BGM PRO Superstrong- Lambretta LI , LI S, SX. TV (series 2-3), DL / GP - 47 teeth are of interest, also looked for: pinion | [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as a lubricant. bgm - Item number: BGM6225G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,23 kg Category: Motor> Clutch> Gearbox Other customers who are looking for clutch pinions -BGM PRO- Vespa Cosa2, PX (1995-), BGM Superstrong, [...]