BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482S Availability: in stock [...]

bgm - Item number: SC1808 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Other customers who are interested in Banner -BGM ORIGINAL- Banner 175x120cm also looked for:

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

bgm - Item number: 3330020 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Spacer Other customers who wanted spacer set clutch cover -BGM PRO 4- Teilig- V50, PV125, ET3, PK50, PK80, PK125 - 1.0mm are interested, also looked for: Spacer | Set | Clutch cover | [...]

bgm - Item number: BGM5710B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frame> Body> Luggage hooks Other customers who are interested in luggage hooks -BGM PRO Aluminum CNC- Vespa GT , GTS, GTV, GTL, S - 50-300ccm - black are also interested in: Luggage hooks | Bag | [...]

BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM / Viton® * CORRECT HEIGHT (20x62x7MM INSTEAD of 20x62x6.5MM) The coupling-side BGM PRO shaft sealing ring has an overall height of 7mm instead of the 6.5mm usual with other manufacturers. The BGM PRO shaft seal is based on the original old model from Piaggio. Anyone who takes apart an old original engine will [...]

bgm - Item number: BGM1220MAPV Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Seals> Seals Other customers who are interested in seals crankcase / fan wheel housing (5x) -BGM PRO silicone Lambretta LI. LIS, SX, TV (Series 2-3), DL / GP 125-200 are also interested in: Seal | Crankcase | [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

Perfectly coordinated carburetor kit. The scope of delivery includes the bgm PRO 17 carburetor, the bgm PRO intake manifold, sport membrane and all the small parts required for assembly. The bgm PRO carburetor is super easy to tune. The PHBN series is widespread and so all tuning parts are easily available. The open BGM PRO intake manifold fits perfectly onto the carburetor [...]

Should be replaced with every exhaust change to be on the safe side. Otherwise, false air can be drawn through the outlet and there is a risk of cylinder damage. bgm - Item number: 8006001 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Gaskets Other customers who are interested in Gasket exhaust -BGM [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]