BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers only have a slightly increased degree of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm motorsilent rubbers, the chassis gains directional stability, steering precision and rigidity. The assembly is simple and offers eg [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

bgm - Item number: 8899001 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Gearbox> U-washers Other customers who are interested in plate pressure plate set chain tensioner -BGM ORIGINAL- Lambretta Series 1-3 are also interested in: Plate | Pressure plate set | Chain tensioner | Plate | Chain tension | Preload [...]

Cylinder head gasket -BGM PRO- 1,5mm Malossi 139ccm & 166ccm bgm - item number: 3820046 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers, who are interested in spacer cylinder head -BGM ORIGINAL Malossi 139/166 ccm- Vespa PX80, PX125, PX150 - 1.5mm, were looking for [...]

bgm - Item number: BGM7929TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Tools Other customers who are interested in castellated wrenches clutch nut -BGM ORIGINAL- Vespa Largeframe ( up to 1995), also searched for: Crown nut wrench | Coupling nut | Crown nut wrench | Clutch tool | Wrench | [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in an excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6483X Availability: in stock [...]

Connection rubber -BGM ORIGINAL- with 34 mm connection width. High-quality connecting rubber for carburettors with 34 mm connection width, such as: bgm PWK 24 bgm PWK 28 bgm PWK 30 Keihin PWK 28 Mikuni TM 30 Mikuni TM 27 Dellorto PHBH 28 Dellorto PHBH 30 Dellorto VHST 28 The rubber has an inner one for a perfect fit on each side [...]

The BGM Superstrong for Lambretta already has a "built-in" clutch compressor system. The Superstrong coupling can be easily compressed with just two screws and long nuts. On the face of the coupling spider, two of the legs are marked with a point, at the bottom of which is the threaded hole for the screw. Here the screws are used for pre-tensioning [...]

bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width on the air filter is [...]

bgm - Item number: BGM2292 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Handlebars> Throttle cable pulleys Other customers who are interested in cable pulley -BGM Pro made by JPP , QUICK ACTION, aluminum CNC- Lambretta LI (series 3 from 1966), LIS (from 1966), SX, [...]